AeroHive AH-AP-150W-AC-FCC AP150W indoor wall plate 2 radio 3x3:3 802.11ac Access Point

WI-FI

Radio Specifications

802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM Modulation) • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback 802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation • 20 dBm (100 mW) Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback 802.11n
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• 2.4 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 300Mbps)
• 5 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 450Mbps)
• 3x3 Multiple-In, Multiple-Out (MIMO) Radio for 5 GHz
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio for 2.4 GHz
• HT20 High-Throughput (HT) Support for both 2.4 GHz and 5 GHz
• HT40 High-Throughput (HT) Support for 5 GHz
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 1300 Mbps), NSS = 1-3
• 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support • TxBF ( Transmit Beamforming)

Interfaces

• 4 10/100/1000 Ethernet ports
• BLE
• PoE

Power Specificatons

• 802.3af Input: Typical 11.3W, Max 12.4W
• 802.3at Input: Typical 23.6W, Max 24.9W (with 12W PoE Output Load)
• 48VDC Input: Typical 26.9W, Max 28.2W (with 15.4W PoE Output Load)

Physical

• WxDxH: 4.2” x 1.1” x 6.9” (105.9mm x 29.2mm x 175mm)
• Weight: 0.86 lb / (0.39 kg)
• Wallplate Bracket Weight: 0.26 lb (0.1 kg)

 Power Options

• IEEE 802.3af / 802.3at (PoE/PoE+)
- With IEEE 802.3af PoE power, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, PoE budget on the down link port is not supported
- With IEEE 802.3at PoE power, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, the available PoE budget on the downlink port is 12W.
• Power supply 48VDC, 0.75A (sold as an accessory)
- With 48VDC input, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, the available PoE budget on the downlink port is 15.4W

Antennas

• 2x Integrated single band, 2.4-2.5 GHz Omnidirectional antennas
• 3 x Integrated single band, 5.1-5.8 GHz Omnidirectional antennas
• 1 x BLE internal antenna
• 1 x ZigBee internal antenna

Mounting

• Wallplate (included with the AP)
• Desk mount (sold as an accessory)
• TPM chip for added security

Environmental

• Operating: 0 to +40°C, Storage: -40 to +70°C
• Humidity: 95%