| Datasheet air-ap2802e-s-k9 |
| Integrated antennas |
Flexible radio (either 2.4 GHz or 5 GHz)
- 2.4 GHz, gain 4 dBi, External antenna, omnidirectional in azimuth
- 5 GHz, gain 6 dBi, External directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
- 5 GHz, gain 5 dBi, External antenna, omnidirectional in azimuth
|
| Interfaces |
◦ 2x100/1000BASE-T autosensing (RJ-45)
- Management console port (RJ-45)
- USB 2.0 (enabled via future software)
|
| Indicators |
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
| Dimensions (W x L x H) |
- Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50” |
| Weight |
- 3.53 lb (1.6 kg) |
| Environmental |
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
- Operating temperature: 32° to 104°F (0° to 40°C)
- Operating humidity: 10% to 90% (noncondensing)
- Operating altitude test: 40˚C, 9843 ft.
|
| System |
- 1024 MB DRAM
- 256 MB flash
|
| Powering options |
- 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)
- 802.3at power injector (AIR-PWRINJ6=)
|
| Power draw |
- 26W at the PSE (22.6W at the PD) with all features enabled except for the USB 2.0 port
- 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled
|
| Compliance |
- Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1
- Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385
- IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac
- Security: 802.11i, WPA2, WPA, 802.1X, AES
- Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)
- Multimedia: Wi-Fi Multimedia (WMM)
- Other: FCC Bulletin OET-65C, RSS-102
|
| Software |
- Cisco Unified Wireless Network Software Release 8.2.111.0 or later
- Cisco IOS® XE Software Release 16.3
|
| Supported wireless LAN controllers |
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
- Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
- Cisco Mobility Express
|
| 802.11n version 2.0 (and related) capabilities |
- 4x4 MIMO with three spatial streams
- Maximal ratio combining (MRC)
- 802.11n and 802.11a/g beamforming
- 20- and 40-MHz channels
- PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 dynamic frequency selection (DFS)
- Cyclic shift diversity (CSD) support
|
| 802.11ac Wave 1 capabilities |
- 4x4 MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, and 80-MHz channels
- PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
| 802.11ac Wave 2 capabilities |
- 4x4 MU-MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, 80, 160-MHz channels
- PHY data rates up to 5.2 Gbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
Switch
.png){kind=icon}
.png){kind=logo}
.jpg)
.png){kind=logo}
Bạn đang cần tư vấn về sản phẩm: AIR-AP2802E-S-K9 ?
Chào bạn,
Cisco wifi AIR-AP2802E-S-K9 sử dụng nguồn PoE+ khoảng 25W, bạn có thể cấp nguồn từ switch hỗ trợ PoE+, UPOE hoặc các bộ nguồn injector. Nguồn injector không đi kèm cùng sản phẩm, bạn có thể tham khảo nguồn injector dùng cho AIR-AP2802E-S-K9:
https://cnttshop.vn/air-pwrinj6-power-injector-8023at-for-aironet-access-points-nguon-co-cong-lan
Thân gửi đến bạn!
Chào anh
CNTTShop đang có sẵn mã Ruckus R730 hỗ trợ wifi 6 ạ. Anh vui lòng để lại liên hệ để bên em tư vấn và báo giá tốt nhất cho anh ạ
Cảm ơn anh!
Chào anh,
CNTTShop có phân phối antenna sử dụng cho Cisco wifi AIR-AP2802E-S-K9, vui lòng cung cấp loại ăngten anh cần mua hoặc sơ đồ thiết kế wifi để được tư vấn loại ăng ten phù hợp nhất.
check mail giúp mình đã báo giá wifi cisco AIR-AP2802E-S-K9 802.11ac W2 AP w/CA; 4x4:3; Ext Ant; 2xGbE, S Domain (CFG) cần thêm gì cho mình biết
Chào anh/chị, khả năng chịu tải tối đa của bộ phát wifi Cisco AIR-AP2802E-S-K9 là 400 client theo thông số của nhà sản xuất đưa ra.