.png){kind=icon}
.png){kind=logo}
Cisco Aironet AIR-AP2802E-SK910C Access Point, external antennas.
| Part Number |
:
|
| List Price |
: $
|
| Giá bán |
:
|
| Bảo hành |
:
|
| Made In |
:
|
| Stock |
:
|
Mô tả Cisco Aironet AIR-AP2802E-SK910C:
Cisco Aironet AIR-AP2802E-SK910C là pack gồm 10 bộ phát wifi Cisco 2802E được cài sẵn firmware Mobility Express. Các bộ phát này có thể sử dụng ngay mà không cần Wireless Controller và license phù hợp cho các hệ thống mạng doanh nghiệp vừa và nhỏ. Ngoài ra người dùng cũng có thể converter các AP sang firmware lightweight để sử dụng với các bộ Wireless Controller như 2500 series, 3500 series, 5500 series...
Thông số kỹ thuật Cisco Aironet AIR-AP2802E-SK910C Access Point:
| Integrated antennas |
Flexible radio (either 2.4 GHz or 5 GHz) - 2.4 GHz, gain 4 dBi, External antenna, omnidirectional in azimuth - 5 GHz, gain 6 dBi, External directional antenna, elevation plane beamwidth 90° Dedicated 5-GHz radio - 5 GHz, gain 5 dBi, External antenna, omnidirectional in azimuth |
| Interfaces |
◦ 2x100/1000BASE-T autosensing (RJ-45) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
| Indicators |
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions (W x L x H) | - Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50” |
| Weight | - 3.53 lb (1.6 kg) |
| Environmental |
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) - Nonoperating (storage) altitude test: 25˚C, 15,000 ft. - Operating temperature: 32° to 104°F (0° to 40°C) - Operating humidity: 10% to 90% (noncondensing) - Operating altitude test: 40˚C, 9843 ft. |
| System |
- 1024 MB DRAM - 256 MB flash |
| Powering options |
- 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®) - 802.3at power injector (AIR-PWRINJ6=) |
| Power draw |
- 26W at the PSE (22.6W at the PD) with all features enabled except for the USB 2.0 port - 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled |
| Compliance |
- Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 - Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 - IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac - Security: 802.11i, WPA2, WPA, 802.1X, AES - Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) - Multimedia: Wi-Fi Multimedia (WMM) - Other: FCC Bulletin OET-65C, RSS-102 |
| Software |
- Cisco Unified Wireless Network Software Release 8.2.111.0 or later - Cisco IOS® XE Software Release 16.3 |
| Supported wireless LAN controllers |
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller - Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches - Cisco Mobility Express |
| 802.11n version 2.0 (and related) capabilities |
- 4x4 MIMO with three spatial streams - Maximal ratio combining (MRC) - 802.11n and 802.11a/g beamforming - 20- and 40-MHz channels - PHY data rates up to 450 Mbps (40 MHz with 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 dynamic frequency selection (DFS) - Cyclic shift diversity (CSD) support |
| 802.11ac Wave 1 capabilities |
- 4x4 MIMO with three spatial streams - MRC - 802.11ac beamforming - 20-, 40-, and 80-MHz channels - PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
| 802.11ac Wave 2 capabilities |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
Bạn đang cần tư vấn về sản phẩm: AIR-AP2802E-SK910C ?
Nhân viên kinh doanh sẽ liên hệ báo giá qua mail bạn nhé. Để được hỗ trợ sớm nhất bạn liên hệ 0862 323 559 (Ms.Hằng)
AIR-AP2802E-SK910C Cisco Aironet wireless 2800 Series Access Point được bảo hành 12 tháng bạn nhé.
Datasheet của mã AIR-AP2802E-SK910C Cisco Aironet wireless 2800 Series Access Point đã được gửi vào mail của bạn, bạn vui lòng check mail nhé.
Chào anh/chị, thiết bị wifi Cisco AIR-AP2802E-SK910C có thể sử dụng được nguồn PoE.
Bộ phát wifi Cisco Aironet AIR-AP2802E-SK910C access point có DRAM là 1024 MB và flash là 256 MB bạn nhé.