AIR-CAP3602I-E-K9 Cisco Aironet wireless 3600 Dual-band controller-based 802.11a/g/n access points

-  2.4 GHz, Gain 2 dBi, internal omni, horizontal beamwidth 360°

-  5 GHz, Gain 4 dBi, internal omni, horizontal beamwidth 360°

-  10/100/1000BASE-T autosensing (RJ-45)

-  Management console port (RJ-45)

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

-  Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)

-  Nonoperating (storage) Altitude Test -25˚C, 15,000 ft.

-  Operating temperature: 32 to 104°F (0 to 40°C)

-  Operating humidity: 10 to 90% percent (noncondensing)

-  Operating Altitude Test -40˚C, 9843 ft.

-  256-MB DRAM

-  32-MB flash

-  AP3600: 44 to 57 VDC

-  Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

-  Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

-  Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

-  IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

-  Security: 802.11i, WPA2, WPA, 802.1X, AES

-  Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

-  Multimedia: Wi-Fi Multimedia (WMM)

-  Other: FCC Bulletin OET-65C, RSS-102

Cisco Unified Wireless Network Software Release with AireOS Wireless Controllers:

-  7.2 or later for the Cisco Aironet 3600 Series Access Point

-  7.4 or later for support of the Wireless Security Module for the 3600 Series Access Point

-  7.5 or later for support of the 802.11ac Wave 1 Module for the 3600 Series Access Point

Cisco IOS XE Software Release:

-  3.2.0SE or later for the Cisco Aironet 3600 Series Access Point

-  3.3.0SE or later for the Cisco 802.11ac Wave 1 Module for the 3600 Series Access Point

-  Wireless Security Module for the 3600 Series Access Point support

AireOS Wireless Controllers

-  Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst^® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex^® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

Cisco IOS Wireless Controllers

-  Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches

-  4x4 multiple-input multiple-output (MIMO) with three spatial streams

-  Maximal ratio combining (MRC)

-  802.11n and 802.11a/g beamforming

-  20- and 40-MHz channels

-  PHY data rates up to 450 Mbps (40-MHz with 5 Ghz)

-  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

-  802.11 dynamic frequency selection (DFS)

-  Cyclic shift diversity (CSD) support