| Software |
- Cisco Unified Wireless Network Software Release 8.10.MR3 or later
- Cisco IOS XE Software Release 17.3.1, or later |
| Supported wireless LAN controllers |
- Cisco Catalyst 9800 Series Wireless Controllers
- Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
|
| 802.11n version 2.0 (and related) capabilities |
- 2x2 MIMO with two spatial streams
- Maximal Ratio Combining (MRC)
- 802.11n and 802.11a/g
- 20- and 40-MHz channels
- PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
- Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
- 802.11 Dynamic Frequency Selection (DFS)
- Cyclic Shift Diversity (CSD) support
|
| 802.11ac |
- 2x2 downlink MU-MIMO with two spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, 80- MHz channels
- PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
- Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
- 802.11 DFS
- CSD support
- WPA3 support
|
| 802.11ax |
- 2x2 uplink/downlink MU-MIMO with two spatial streams
- Uplink/downlink OFDMA
- TWT
- BSS coloring
- MRC
- 802.11ax beamforming
- 20-, 40-, 80- channels
- PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
- Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
- 802.11 DFS
- CSD support
- WPA3 support
|
| Integrated antenna |
- 2.4 GHz: Peak gain 3 dBi, internal antenna
- 5 GHz: Peak gain 5 dBi, internal antenna
|
| Interfaces |
- 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
- 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
- Management console port (RJ-45)
- USB 2.0 at 4.5W
- Passthru Port
|
| Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) |
| Weight |
0.8 lb. (373.2g) |
| Input power requirements |
- 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
- Cisco power injector, AIR-PWRINJ6=
- 802.3af PoE
- Cisco power injector, AIR-PWRINJ5=
|
| PoE power |
- 802.3af (PoE)
- 802.3at (PoE+): Either USB or LAN1 PSE enabled. |
| Link speed |
- 2.5G mGig |
| Environmental |
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
- Operating temperature: 32° to 122°F (0° to 50°C)
- Operating humidity: 10% to 90% (noncondensing)
- Operating altitude test: 40˚C, 9843 ft.(3000 m)
|
| Available transmit power settings (Max/Min) |
- 2.4 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW)
- 5 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) |
Switch
.png){kind=icon}
.png){kind=logo}
Bạn đang cần tư vấn về sản phẩm: C9105AXW-S ?
Cty bên em chuyên phân phối Wifi Cisco giá tốt, báo giá bộ phát wifi 6 Cisco C9105AXW-S đã được gửi vào mail. Vui lòng check mail để biết được thông tin.
Bộ phát wifi 6 Cisco C9105AXW-S có hỗ trợ phần cứng riêng cho Bluetooth 5 anh nhé.
Chào anh/chị, báo giá bộ phát wifi Cisco C9105AXW-S đã được gửi vào mail của anh/chị.
Chào anh/chị, nguồn Cisco AIR-PWRINJ5= có thể dùng được cho wifi C9105AXW-S.
Chào anh/chị, báo giá cho mình wifi Cisco C9105AXW-S và nguồn PoE AIR-PWRINJ6= đã được gửi vào mail của anh/chị.