Software |
● Cisco Unified Wireless Network Software Release 8.10.x or later
● Cisco IOS ® XE Software Release 16.12.1 with AP Device Pack, or later |
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller |
802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 1.72 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support |
802.11ac |
● 8x8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 4.8 Gbps (160 MHz with 5 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support |
802.11ax |
● 8x8 uplink/downlink MU-MIMO with eight spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support |
External antenna with Smart antenna connector |
● The Cisco Catalyst 9130AXE Access Points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
● Supports Self-Identifiable Antennas (SIA) on the Smart antenna connector
● Smart antenna connector is a compact multi-RF connector with 8-DART interface
● Requires the AIR-CAB002-DART-R= 2-fppt smart antenna connector when used with antennas with a RP-TNC connector
● Requires the AIR-CAB002-D8-N= 2 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna |
Interfaces |
● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
● Management console port (RJ-45)
● USB 2.0 at 4.5W (enabled via future software) |
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) |
● 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) |
Weight |
● 3.78 lb. (1.71 kg) |
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
Environmental |
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.(3000 m) |
System memory |
● 2048 MB DRAM
● 1024 MB flash |
Bạn đang cần tư vấn về sản phẩm: C9130AXE-S ?
Bộ phát wifi Cisco C9130AXE-A bảo hành 12 tháng bạn nhé.
Nguồn AIR-PWRINJ6 có dùng được cho bộ phát wifi Cisco C9130AXE-A bạn nhé.
Chào anh/chị, báo giá bộ phát wifi Cisco C9130AXE-A đã được gửi vào email, anh/chị vui lòng kiển tra ạ.
Cty bên em chuyên phân phối Wifi Cisco giá tốt, báo giá bộ phát wifi 6 Cisco C9130AXE-A đã được gửi vào mail. Vui lòng check mail để biết được thông tin.
Bộ phát wifi 6 Cisco Cisco C9130AXE-A Cisco Catalyst 9130 Series Access Point WiFi 6 dùng đồng thời 2 băng tần 2.4Ghz và 5G bạn nhé.