Cisco CVR-2QSFP28-8SFP Cisco Converter Module

Phân phối Bộ chuyển đổi Cisco CVR-2QSFP28-8SFP (CVR 2QSFP28 8SFP) Convert 2 QSFP Ports into 8 SFP+ Ports Adapter Module chính hãng giá tốt nhất thị trường, bảo hành chính hãng
Mã sản phẩm: CVR-2QSFP28-8SFP
Tình trạng: Còn hàng
Check Giá List

Bộ chuyển đổi Cisco CVR-2QSFP28-8SFP Convert 2 QSFP Ports into 8 SFP+ Ports Adapter Module

The Cisco® server link interface connector (SLIC) remediates the deficiencies of breakout cables and also offers its own distinct advantages. The SLIC adapter breaks out a pair of higher-speed ports into eight lower-speed ports while supporting standard cabling and Small Form-Factor Pluggable (SFP)– and Enhanced SFP (SFP+)–compliant interfaces. Users can replace cables and optics for individual ports without affecting any other port. Furthermore, the SLIC adapter supports different types of interfaces within the same SLIC adapter.

Cisco CVR-2QSFP28-8SFP

Những lợi ích mà Bộ chuyển đổi Cisco CVR-2QSFP28-8SFP mang lại:

Feature

Benefit

Forward compatible

The SLIC adapter supports both 40- and 100-Gbps 4-lane optics. Thus, use with 40-Gbps Quad SFP+ (QSFP+) and 10-Gbps SFP+ translates into 100-Gbps QSFP28 and 25-Gbps SFP+ without the need to update the SLIC adapter itself. Data center cabling will not need to be changed for this conversion.

Uplink flexibility

The SLIC adapter enables the number of uplink ports to be modified based on data center traffic needs. More SLIC adapters can be plugged in or unplugged to obtain any oversubscription ratio.

Space conscious

The SLIC adapter can extend above the top of a rack to further increase port density and more effectively use available rack space. The SLIC has a compact design and is only 1.5 rack units (1.5RU) tall. This design is comparable to a typical 2RU switch solution for the same port density.

Cost effective

The SLIC adapter helps lower both capital expenditures (CapEx) and operating expenses (OpEx) by reducing the number of rack units and individual switches required to achieve the desired port density. By decreasing power and cooling demands, the SLIC adapter helps data centers scale their capabilities at reduced cost.

Thông số kỹ thuật :

Feature

Specification

Physical dimensions

-  Dimensions without pull tab (height x width x depth): 2.42 x 0.93 x 4.82 in. (6.15 x 2.36 x 12.24 cm)

-  Extension from switch when installed: 2.75 in. (6.99 cm)

Accessories

Compatible accessory kit for recessed switch mounting: N3K-C3064-ACC-KIT

Thứ tự port kết nối:

Switch Port Configuration with SLIC Adapter

Data Rate

Passive Copper Cables and 1000BASE-T Transceivers

Optical Transceivers and Active Cables

1 Gbps

1000BASE-T SFP

1000BASE-SX and –LH/LX SFP

10 Gbps

10-Gbps passive twinax (1 to 5m)

10-Gbps active cables and 10GBASE-SR SFP

25 Gbps

25-Gbps passive twinax (1 to 3m)

25-Gbps active cables and 25GBASE-SR SFP

Bạn đang cần tư vấn về sản phẩm: #CVR-2QSFP28-8SFP ?

Bạn cần báo giá tốt nhất!
Hỗ trợ kinh doanh
Mr. Lê Tuấn
0906 051 599
Ms. Phạm Quý
096 350 6565
Ms. Nguyễn Thủy
0962 052 874
Ms. Vũ Thị Kim Dung
0967 415 023
Ms Hoa
0868 142 066
Ms Vinh
0862 323 559
Ms Tuyên
0369 832 657
Hỗ trợ kỹ thuật
Mr. Hiếu
0981 264 462
Mr Vinh
0973 805 082
Mr Đạt
0941 164 370
Check giá trên mobile
Thanh toán online

CNTTShop.vn là đối tác của Cisco Systems Vietnam Ltd
Copyright @ 2017-2019 CNTTShop Ltd. | Viet Thai Duong Technologies Co., Ltd | All Rights Reserved.