Hardware TypeA2:BA2:B30 |
Indoor AP |
Number of Radios |
3 + 1 BLE |
Number of Antennas |
4 2.4GHz band WiFi + 8 5GHz band WiFi + I Dual band
Scanning + 1 2.4GHz band BLE |
Antenna Type and Peak Gain |
PIFA: |
4.0 dBi for 2.4 GHz band WiFi antennas |
6.0 dBi for 5.0 GHz band WiFi antennas |
4.0 dBi for dual band Scanning radio antenna |
4.5 dBi for 2.4 GHz band BLE antenna |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
Frequency Band: 2.4 GHz |
Channel width: 20/40 MHz |
Modulation: BPSK, QPSK, QAM64 |
MIMO chains: 4x4 service |
Radio 2 Capabilities |
Frequency Band: 5.0 GHz |
Channel width: 20/40/80/80+80/160MHz |
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 |
Mimo chains: 8x8 service in mode 1 or 4x4+4x4, service in mode 2 |
Radio 3 Capabilities |
Frequency band: 2.4/5.0 GHz |
MIMO chains: 1x1 frequency scanning |
Maximum Data Rate |
Radio 1: up to 1147.5 Mbps |
Radio 2: up to 4.804 Gbps in 8x8 MIMO and in 4x4 + 4x4 MIMO modes |
Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
Interfaces |
1x 100/1000/2500 Base-T RJ45 |
1 x 10/100/1000 Base-T RJ45 |
1x Type 3.0 USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
2x 802.3at/bt/30W Passive PoE in (Full function) |
1x 802.3at PoE in (USB3.1 disabled) |
Simultaneous SSIDs |
Up to 24 |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP- MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
Radio 1: 2.4 GHz 27 dBm / 500 mW (4 chains combined) |
Radio 2: 5 GHz 25.5 dBm / 354 mW (4 chains combined) |
Radio 3: NA |
Kensington Lock |
Yes |
SSID Types Supported |
Local-Bridge, Mesh, Tunnel |
Per Radio Client Capacity |
up to 512 clients per radio (Radio1 and Radio2) |
Cellular Co-existence |
Yes |
LED Off Mode |
Yes |
Bạn đang cần tư vấn về sản phẩm: FAP-831F-S ?
Chào anh/chị, báo giá bộ phát wifi FortiAP FAP-831F-S đã được gửi vào mail của anh/chị.
Chào anh/chị, bộ phát FortiaAP FAP-831F-S đạt tiêu chuẩn wifi 6.
Chào anh/chị, bộ phát wifi FortiAP FAP-831F-S có thể sử dụng được thêm antenna ngoài.
Chào anh/chị, bộ phát wifi FortiAP FAP-831F-S chịu tải tối đa 1024 user theo thông số nhà sản xuất đưa ra.