| Hardware |
| Hardware Type |
Indoor Wall Plate AP |
| Number of Radios |
2 |
| Number of Antennas |
4 internal |
| Peak Antenna Gain |
1.5 dBi for 2.4 GHz, 2 dBi for 5 GHz |
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350,
5.470–5.725, 5.725–5.850 |
| Frequency of Radio 1 |
2.4 GHz b/g/n (2x2:2 stream)
RTL8197F (embedded in SoC)
20/40 Mhz (256 QAM) |
| Frequency of Radio 2 |
5 GHz a/n/ac (2x2:2 stream)
RTL8812BR
20/40/80/160 MHz (256 QAM)
MU-MIMO 2 simultanous devices |
| Maximum Data Rate |
Radio 1: up to 300 Mbps, Radio 2: up to 867 Mbps |
| Interfaces |
1x GE WAN/POE Uplink
2x RJ45 GE, 1x RJ45 GE/POE-PS (for IP phone)
1x RJ45 pass-thru |
| Serial Console Port |
1x RJ45 RS232 |
| Power over Ethernet (PoE) |
1x PoE RJ45 port
If powered by 802.3af (15.4 W) Max PSE Output = 4 W
If powered by 802.3at (25.5 W) Max PSE Output = 15.4 W |
| Simultaneous SSIDs |
16 capable |
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2,
PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP
and Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power |
20 dBm (100 mW)* |
| Physical Security |
No |
| IEEE Specifications |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g,
802.11h, 802.11i, 802.11j, 802.11n, 802.1x, 802.3af,
802.11ac, 802.3at, 802.3az |
Support Local-Authentication SSID using
Open or WPA2-Personal Security |
Yes |
Support 64-digit Hexadecimal
Passphrase for WPA2-Personal Security |
Yes |
| Support Captive-portal SSID |
Yes |
Support Local-Standalone SSID
when Managed by FortiCloud
(in Bridge mode only) |
Yes |
| FortiPresence Capable |
No |
| Wireless Mesh Capable |
No |
| Management Systems |
FortiGate or FortiCloud |
| SSID Types Supported |
Local-Bridge, Tunnel |
| FortiDeploy & FortiCloud Key |
Yes |
| Per Radio Client Capacity |
Up to 64 |
| LED Off Mode |
Yes |
| Advanced 802.11 Features |
| 802.11ac Wave 2 MU-MIMO |
Yes |
Transmit Beam Forming
(TxBF) |
Yes |
Low-Density Parity Check
(LDPC) Encoding |
Yes |
Maximum Ratio Combining
(MRC) |
Yes |
A-MPDU and A-MSDU
Packet Aggregation |
Yes |
| MIMO Power Save |
Yes |
| Short Guard Interval |
Yes |
| Wireless Monitoring Capabilities |
| Frequencies Scanned |
N/A |
Background Scan with Client
Access on 2.4 and 5 GHz |
No |
Full-time Scan as
Dedicated Monitor |
No |
| Full-time scan with client access |
No |
| Packet sniffer mode |
No |
| Spectrum analyzer |
No |
| Dimensions |
| Diameter x Height |
6.69 x 4.04 x 1.08 inches (AP size)
170 x 102.5 x 27.5 mm (AP size) |
| Weight |
1.3 lb (0.6 kg) |
| Package (shipping) Weight |
1.6 lb (0.74 kg) |
| Mounting Options |
Wall |
| Included Accessories |
Wall mount bracket |
| Environment |
| Power Supply |
PoE 802.3af (15.4 W)
Option: 12V/2A AC adapter (not provided) |
| Humidity |
5–90% non condensing |
| Operating Temperature |
32–104°F (0–40°C) |
| Storage Temperature |
-4–158°F (-20–70°C) |
| Directives |
Low Voltage Directive • RoHS |
| UL2043 Plenum Material |
No |
| Mean Time Between Failures |
>10 Years |
| UL2043 Plenum Material |
N/A |
| Certifications |
| SRRC (China) |
Yes |
| Warranty |
| Limited Lifetime Warranty |
Yes |
Switch
.png){kind=icon}
.png){kind=logo}
Bạn đang cần tư vấn về sản phẩm: FAP-C24JE ?
Chào anh/chị, báo giá bộ phát wifi Fortinet FAP-C24JE đã được gửi vào mail của anh/chị.