Datasheet Four-Faith F3332 Specifications |
Cellular Module |
Industrial cellular module |
Standard and Band |
GSM850/900/1800/1900MHz
GPRS/EDGE Class 12 |
Bandwidth |
236.8Kbps |
TX power |
GSM850/900: <33dBm
GSM1800/1900: <30dBm |
RX sensitivity |
<-106dBm |
WIFI Specification |
Standard |
IEEE802.11b/g/n |
Bandwidth |
IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 150Mbps (max) |
Security |
WEP, WPA, WPA2, etc.
WPS (optional) |
TX power |
21.5dBm(11g),26dBm(11b) |
RX sensitivity |
<-72dBm@54Mpbs |
Hardware System |
CPU |
Industrial 32bits CPU |
FLASH |
8MB (Extendable to 64MB) |
SDRAM |
64MB |
Interface type |
WAN |
1x 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
LAN |
4x 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
Serial |
1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baud rate: 2400~115200 bps |
Indicator |
"Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WIFI", "Signal Strength" |
Antenna |
Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional) |
SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
Power |
Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset |
Restore the router to its original factory default settings |
USB |
Standard A type USB host interface (reserved) |
Power supply |
Standard Power |
DC 12V/1.5A |
Power range |
DC 5~35V |
Consumption |
<450mA (12V) |
Physical Characteristics |
Housing |
Iron, providing IP30 protection |
Dimensions |
206x135x28 mm |
Weight |
790g |
Environmental Limits |
Operating Temperature |
-35~+75ºC(-31~+167℉) |
Storage Temperature |
-40~+85ºC (-40~+185℉) |
Operating Humidity |
95% ( unfreezing) |
Bạn đang cần tư vấn về sản phẩm: F3332 ?