Phân phối Module quang HP J9144A X131 10GBASE-LRM X2 SC Duplex, 1310nm 220m Multi Mode MMF Transceiver chính hãng giá tốt, bảo hành 12 tháng
Cisco Part Number |
:
|
List Price |
: $
|
Giá bán |
:
|
Bảo hành |
:
|
Made In |
:
|
Stock |
:
|
Module quang HPE J9144A là module quang cho môi trường truyền dẫn Multi Mode với bước sóng là 1310 nm, khoảng cách truyền dẫn tối đa là 220m, sử dụng đầu kết nối SC/SC (2 đầu to). Transceiver J9144A là module quang Multi Mode do vậy để đảm bảo SFP hoạt động được thì mọi thứ phải đồng bộ, tức là cáp quang truyền dẫn, dây nhẩy, dây đuôi chuột (Pigtail) phải là Multi Mode.
SFP J9144A còn tương thích với rất nhiều card mạng 10G của HPE Proliant Server, Storage do vậy, transceiver này còn được dùng làm link kết nối cho các máy chủ khi cần kết nối 10G sử dụng cho các ứng dụng truy nhập tốt độ cao như Ảo hóa, Video Streaming, Gaming ... Hoặc các kết nối Cluster, HA (High Avaliable) giữa hai Core Switch, hai Server hay hai Storage.
HP X131 10G X2 SC LRM Transceiver (J9144A) An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 m on legacy multimode fiber. |
Ports | 1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only |
Connectivity |
Connector type: SC Wavelength: 1310 nm |
|
Physical characteristics |
Dimensions: 1.59(w) x 3.54(d) x 0.7(h) in (4.05 x 9.0 x 1.78 cm) Weight: 0.35 lb. (0.16 kg) Transceiver form factor: X2 |
|
Environment |
Operating temperature: 32°F to 158°F (0°C to 70°C) Operating relative humidity: 0% to 95%, noncondensing Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C) Nonoperating/Storage relative humidity: 0% to 95%, noncondensing Altitude:up to 10,000 ft. (3 km) |
|
Electrical characteristics |
Power consumption typical: 3.2 W Power consumption maximum: 4.2 W |
|
Cabling |
Cable type : 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations); Maximum distance: • 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km Cable length: 5m to 220m Fiber type: Multi Mode |
|
Notes | For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic" on the "HPE 10-GbE Transceivers" Manuals Web page. Power Consumption: 4W Max |
|
Services | Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
|
|
Bạn đang cần tư vấn về sản phẩm: #J9144A ?