.png){kind=icon}
.png){kind=logo}
Maipu PU3200-1G1FTN GPON HGU
Thông số kỹ thuật
|
LED |
Mark |
Status |
Description |
|
Power |
PWR |
On |
Device is powered up. |
|
Off |
Device is powered down. |
||
|
Optical signal loss |
LOS |
Blink |
Device does not receive optical signals. |
|
Off |
Device has received optical signal. |
||
|
Registration |
REG/PON |
On |
Device is registered to the PON system. |
|
Off |
Device is not registered to the PON system. |
||
|
Blink |
Device is registering. |
||
|
Interface |
GE、FE/ |
On |
Port is connected properly. |
|
LAN1~2 |
Off |
Port connection exception or not connected. |
|
|
|
Blink |
Port is sending or/and receiving data. |
|
|
POTS |
FXS/PHONE |
On |
Device has registered to the soft-switch, but without ongoing data transmission. |
|
Off |
Device is power off or not registered to the soft-switch. |
||
|
Blink |
The port is with ongoing data transmission. |
||
|
Wireless |
Wi-Fi |
On |
Wi-Fi turned on. |
|
Off |
Device is power off or Wi-Fi turned off. |
||
|
Blink |
Wi-Fi data transmission. |
||
|
Pair |
Pair |
On |
WPS client is connected. (LED turn off after 5 minutes of successful connection) |
|
Off |
Does not use WPS or WPS client is connected. (LED turn off after 5 minutes of successful connection) |
||
|
Blink |
WPS client is connecting. |
|
Port Type |
Function |
|
PON |
PU3200-1G1FTN: SC/UPC type, single mode optical fiber cable PU3200-1G1FTNT: SC/APC type, single mode optical fiber cable with WDM |
|
GE、FE |
Connect device with ethernet port by RJ-45 cat5 cable. |
|
FXS |
Connect the telephone with FXS port by telephone wire. |
|
RST |
Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings. |
|
DC12V |
Connect with power adapter. |
|
Pair |
Press down Wi-Fi pair button to begin pairing. |
|
Wi-Fi |
Wi-Fi on/off. |
|
Hardware Specification |
|
|
PON interface |
GPON Class B+ |
|
Receiving sensitivity: ≤-28dBm |
|
|
Transmitting optical power: 0~+4dBm |
|
|
Transmission distance: 20KM |
|
|
Wavelength |
Tx1310nm, Rx 1490nm |
|
Optical interface |
SC/UPC connector |
|
LAN interface |
1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
|
POTS interface |
1 FXS, RJ11 connectors |
|
Support: G.711/G.723/G.726/G.729 codec |
|
|
Support: T.30/T.38/G.711 Fax mode, DTMF Relay |
|
|
Line testing according to GR-909 |
|
|
Wi-Fi interface |
Compliant with IEEE802.11b/g/n |
|
Operating frequency: 2.400-2.4835GHz |
|
|
support MIMO, rate up to 300Mbps, |
|
|
2T2R,2 external antenna 5dBi, |
|
|
Support: multiple SSID |
|
|
Channel:13 |
|
|
Modulation type: DSSS、CCK and OFDM |
|
|
Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
|
|
LED |
Status of POWER, LOS, PON, LAN1, LAN2, PHONE, Pai, WiFi |
|
Operating condition |
Temperature: 0℃～+50℃ |
|
Humidity: 10%～90%（non-condensing） |
|
|
Storing |
Temperature: -30℃～+60℃ |
|
condition |
Humidity: 10%～90%（non-condensing） |
|
Power supply |
DC 12V/1A |
|
Power supply |
≤6W |
|
Dimension |
185mm×120mm×34mm（L×W×H） |
|
Net weight |
0.24Kg |
|
Software Key Feature |
|
|
Software mode |
Bridging and Routing Mode. |
|
Layer2 |
802.1D&802.1ad bridge,802.1p Cos,802.1Q VLAN. |
|
Layer3 |
IPv4, DHCP Client/Server, PPPoE, NAT, DMZ, DDNS. |
|
Multicast |
IGMPv1/v2/v3, IGMP snooping. |
|
Security |
Flow & Storm control, Loop Detection. |
|
Wi-Fi |
IEEE802.11b/g/n (TX power:17dBm/16dBm/15dBm), Up to 300Mbps |
|
Authentication: WEP/WAP-PSK(TKIP)/WAP2-PSK(AES). |
|
|
POTS |
VoIP protocol: SIP、IMS-SIP |
|
Voice enhancement: |
|
|
Local exchange |
|
|
Dynamic voice jitter buffering |
|
|
Silence detection |
|
|
Echo offset |
|
|
Loss compensation |
|
|
Firewall |
Filtering Based on ACL/MAC/URL |
|
O&M |
WEB/TELNET/OAM/OMCI/TR069, Support private OAM/OMCI protocol |
Bạn đang cần tư vấn về sản phẩm: PU3200-1G1FTN ?