Trụ sở tại Hà Nội

Số 2A/125 Bùi Xương Trạch – Thanh Xuân – Hà Nội

090 605 1599 - 096 350 6565

07h30 đến 17h30

AIR-AP1832I-S-K9C Cisco Aironet wireless 1830 Series Access Point

Cisco wifi AIR-AP1832I-S-K9 Aironet wireless 1830 Access Point Dual-band, controller-based 802.11a/g/n/ac, configurable, with default software Mobility Express. Wave 2 data rates up to 867 Mbps, 1x1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE). Not include power.

Mã sản phẩm: AIR-AP1832I-S-K9C


Cisco wifi AIR-AP1832I-S-K9C Aironet wireless 1830 Access Point

Part Number   : AIR-AP1832I-S-K9C
List Price         : $715
Stock              : Liên hệ

Mô tả Cisco Aironet AIR-AP1832I-S-K9C:

Bộ phát wifi Cisco Aironet AIR-AP1832I-S-K9C access point là bô phát wifi chuẩn 802.11 a/b/g/n/ac (Wave 2) với antena được thiết kế ở bên trong thuộc dòng Cisco Aironet wireless 1830 Access Point. Bạn có thể gắn cisco wireless trên bàn hoặc trên tường sử dụng bộ kit đi kèm. Cisco Aironet AIR-AP1832I-S-K9C hỗ trợ cả 2 dải tần là 2.4 GHz 3X3 802.11b/g/n MU-MIMO và 5 GHz 2x2 802.11 a/n/ac (Wave 2) MU-MIMO.

View Datasheet

Cisco AIR-AP1832I-S-K9C Access Point sử dụng công nghệ mới nhất 802.11ac Wave 2, cung cấp tốc độ lên tới 867Mbps cho công suất và độ tin cậy cao hơn.

Cisco wifi AIR-AP1832I-S-K9C Aironet wireless 1830 Access Point

Cisco wireless AIR-AP1832I-S-K9C hỗ trợ công nghệ multiple-input multiple-output (MIMO) đa luồng cho phép truyền tải dữ liệu với nhiều sóng 802.11ac giúp cải thiện trải nghiệm của khách hàng. Công nghệ beamforming được tích hợp giúp cải thiện hiệu năng kết nối đến các thiết bị di động, bao gồm các thiết bị một và hai luồng trên 802.11ac, đồng thời cải thiện tuổi thọ pin trên các thiết bị di động như điện thoại thông minh và máy tính bảng

Thông số kỹ thuật Cisco Aironet AIR-AP1832I-S-K9C Access Point:

Integrated antennas

●  2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°

●  5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°


●  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)

●  Management console port (RJ-45)

●  USB 2.0 (enabled via future software)


●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H) ●  Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight ●  3.12 lb (1.41 kg) 

Cisco Aironet 1830i

●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

●  Operating temperature: 32° to 104°F (0° to 40°C)

●  Operating humidity: 10% to 90% (noncondensing)

●  Operating altitude test: 40˚C, 9843 ft.


●  1 GB DRAM

●  256 MB flash

Powering options

●  AP1830: 44 to 57 VDC

●  Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz

●  802.3af/802.3at

●  Enhanced PoE

●  Cisco local power supply, AIR-PWR-C=

●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only), AIR-PWRINJ6=

Note: If 802.3af PoE is the source of power, the USB port is disabled.

Power draw

●  15.4W

Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.

Physical security

●  Torx security screw, included with the access point


●  Mounting bracket: AIR-AP-BRACKET-8= (available as spare)

●  Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports


●  Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

●  Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

●  IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

●  Security: 802.11i, WPA2, WPA, 802.1X, AES

●  Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

●  Multimedia: Wi-Fi Multimedia (WMM)

●  Other: FCC Bulletin OET-65C, RSS-102


Cisco Unified Wireless Network Software Release with AireOS wireless controllers:

● or later for the Cisco Aironet 1830 Series Access Points

Deployment modes

Centralized, standalone, sniffer**, Cisco FlexConnect, monitor**, OfficeExtend**, mesh**

Supported wireless LAN controllers

●  Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller,** Cisco Catalyst 3650 and 3850 Series Switches with integrated controller**

●  Cisco Mobility Express

802.11n version 2.0 (and related) capabilities

●  3x3 MIMO with two spatial streams

●  Maximal ratio combining (MRC)

●  20- and 40-MHz channels

●  PHY data rates up to 300 Mbps (40 MHz with 5 GHz)

●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

●  802.11 dynamic frequency selection (DFS)

●  Cyclic shift diversity (CSD) support

802.11ac Wave 1 and 2 capabilities

●  3x3 MIMO with two spatial streams, single-user or multiuser MIMO

●  MRC

●  802.11ac beamforming (transmit beamforming)

●  20-, 40-, and 80-MHz channels

●  PHY data rates up to 867 Mbps (80 MHz in 5 GHz)

●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

●  802.11 DFS

●  CSD support