Logo CNTTShop.vn

Hotline: 0966 658 525

Công Ty TNHH Công Nghệ Việt Thái Dương
NTT03, Line 1, Thống Nhất Complex, 82 Nguyễn Tuân, Thanh Xuân, Hà Nội.
Danh mục sản phẩm

AIR-AP2802I-SK910C Cisco Aironet wireless 2800 Series Access Point

Cisco Aironet AIR-AP2802I-SK910C bộ 10 chiếc access point 2802I 802.11ac wave 2, có thể cấu hình, chưa bao gồm nguồn.

✓ Mã sản phẩm: AIR-AP2802I-SK910C
✓ Tình trạng: Còn Hàng
Sản phẩm đã End-of-Sale (EoS), thay thế bằng Wifi 6 Cisco Catalyst 9120AX
Check Giá List
AIR-AP2802I-SK910C Datasheet

So sánh với bộ phát Wifi khác:

Cam Kết Bán Hàng

✓ Sản Phẩm Chính Hãng 100% Đầy Đủ CO/CQ

✓ Giá Cạnh Tranh Rẻ Nhất Thị Trường

✓ Ưu Đãi Lớn Cho Đại Lý Và Dự Án

✓ Bảo Hành, Đổi Trả Nhanh Chóng

✓ Giao Hàng Trên Toàn Quốc

✓ Hỗ Trợ Kỹ Thuật Chuyên Nghiệp, Nhiệt Tình

✓ Chăm Sóc Khách Hàng Trước, Trong và Sau Khi Mua Hàng Tận Tâm.

CNTTShop.vn - 19 năm Uy tín cung cấp Thiết bị mạng & Dịch vụ Mạng trên toàn quốc.

NTT03, Thống Nhất Complex, Thanh Xuân, Hà Nội. Số 31B, Đường 1, Phường An Phú, Quận 2 (Thủ Đức), TP HCM.

Cisco wifi AIR-AP2802I-SK910C pack 10.

Part Number 
List Price
: $
Giá bán
Bảo hành
Made In
Stock

Mô tả Cisco Aironet AIR-AP2802I-SK910C:

Cisco AIR-AP2802I-SK910C là 1 pack gồm 10 chiếc wifi Cisco AIR-AP2802I-S-K9 được cài sẵn firmware Mobility Express. Với firmware này, người dùng có thể sử dụng virtual controller để quản trị các AP trong mạng mà không cần thêm controller cứng hay license.

Bộ phát wifi Cisco 2802I đạt chuẩn 802.11ac wave 2 với hai băng tần 5Ghz cho tốc độ tổng hợp lên tới 5.2 GHz. Thiết bị cũng được trang bị công nghệ MU-MIMO cùng các kênh có độ rộng lên tới 160 MHz.

Thông số kỹ thuật Cisco Aironet AIR-AP2802I-SK910C Access Point:

Integrated antennas

Flexible radio (either 2.4 GHz or 5 GHz)

-  2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth

-  5 GHz, gain 6 dBi,  internal directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

-  5 GHz, gain 5 dBi,  internal antenna, omnidirectional in azimuth

Interfaces

◦   2x100/1000BASE-T autosensing (RJ-45)

-  Management console port (RJ-45)

-  USB 2.0 (enabled via future software)

Indicators

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H) -  Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”
Weight -  3.53 lb (1.6 kg)
Environmental

-  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

-  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

-  Operating temperature: 32° to 104°F (0° to 40°C)

-  Operating humidity: 10% to 90% (noncondensing)

-  Operating altitude test: 40˚C, 9843 ft.

System

-  1024 MB DRAM

-  256 MB flash

Powering options

-  802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)

-  802.3at power injector (AIR-PWRINJ6=)

Power draw

-  26W at the PSE (22.6W at the PD) with all features enabled except for the USB 2.0 port

-  30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled

Compliance

-  Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

-  Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

-  IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

-  Security: 802.11i, WPA2, WPA, 802.1X, AES

-  Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

-  Multimedia: Wi-Fi Multimedia (WMM)

-  Other: FCC Bulletin OET-65C, RSS-102

Software

-  Cisco Unified Wireless Network Software Release 8.2.111.0 or later

-  Cisco IOS® XE Software Release 16.3

Supported wireless LAN controllers

-  Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

-  Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches

-  Cisco Mobility Express

802.11n version 2.0 (and related) capabilities

-  4x4 MIMO with three spatial streams

-  Maximal ratio combining (MRC)

-  802.11n and 802.11a/g beamforming

-  20- and 40-MHz channels

-  PHY data rates up to 450 Mbps (40 MHz with 5 GHz)

-  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

-  802.11 dynamic frequency selection (DFS)

-  Cyclic shift diversity (CSD) support

802.11ac Wave 1 capabilities

-  4x4 MIMO with three spatial streams

-  MRC

-  802.11ac beamforming

-  20-, 40-, and 80-MHz channels

-  PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)

-  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

-  802.11 DFS

-  CSD support

802.11ac Wave 2 capabilities

-  4x4 MU-MIMO with three spatial streams

-  MRC

-  802.11ac beamforming

-  20-, 40-, 80, 160-MHz channels

-  PHY data rates up to 5.2 Gbps

-  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

-  802.11 DFS

-  CSD support

Bạn đang cần tư vấn về sản phẩm: AIR-AP2802I-SK910C ?

Có 0 bình luận:

Thông tin liên hệ

Hỗ trợ kinh doanh

Ms. Huyền
0979 925 386
Ms. Tuyên
0369 832 657
Ms. Hằng
0862.323.559
Ms. Quỳnh Anh
0966 658 525
Ms. Lan Anh
0862 158 859
Ms. Quý
096 350 6565
Ms. Thảo
0358 265 666

Hỗ trợ kỹ thuật

Mr. Hiếu
0981 264 462
Mr. Đạt
0941 164 370
Mr. Vinh
0973 805 082