.png){kind=icon}
.png){kind=logo}
Cisco C6800-32P10G Catalyst 6800 32 port 10GE with integrated dual DFC4
Cisco Part Number : C6800-32P10G
Cisco Spare Part Number : C6800-32P10G=
Bảo hành : 12 tháng
List Price : $35,000
Giá Bán : Liên hệ
Made In : Asia
Stock : Liên hệ
| View Datasheet C6800-32P10G |
Thông số kỹ thuật
|
Attribute |
C6800-32P10G |
|
10GE portss |
32 ports 1GE or 10GE Numbered left to right: - Top row has odd numbered ports: TenGigabitEthernet 1 to 31
- Bottom row has even numbered ports: TenGigabitEthernet 2 to 32
|
|
Port groups |
4 port groups 2 port-sets per port group Port-group 1: - 1, 3, 5, 7
- 9,11, 13, 15
Port-group 2: - 2, 4, 6, 8
- 10, 12, 14, 16
Port-group 3: - 17, 19, 21, 23
- 25, 27, 29, 31
Port-group 4: - 18, 20, 22, 24
- 26, 28, 30, 32
|
|
Performance Mode |
Yes per port-group |
|
Switch fabric connection |
160 Gbps in 6807-XL chassis 80 Gbps in 6500-E chassis |
|
Oversubscription |
In C6807-XL: 32 ports: oversubscription mode 2:1 16 ports: performance mode 1:1 In Catalyst 6500-E: 32 ports: oversubscription mode 4:1 16 ports: performance mode 2:1 |
|
Number of forwarding engines |
2 |
|
Throughput (per module) |
IPv4: up to 120 Mpps IPv6: up to 60 Mpps |
|
Forwarding engine features |
- Comes equipped with DFC4-E for distributed forwarding, supporting:
◦ 256K IPV4 and MPLS Forwarding entries, 128K IPV6 entries
◦ 64K IPV4/IPV6 Multicast routes
◦ 64K ACL entries (shared between QoS and security)
◦ 1M NetFlow entries (32 port card, with 2 forwarding engines)
◦ 512K NetFlow entries (8/16 port card, with 1 forwarding engine)
- Both models support a MAC Address Table of 128K
- In addition to the increased NetFlow entries, supports Flexible NetfFlow, Sampled NetFlow and Egress NetFlow
- Increased MPLS and VPLS performance of up to:
◦ 120Mpps for MPLS forwarding and up to 60Mpps for VPLS forwarding (32 port card, with 2 forwarding engines)
◦ 60Mpps for MPLS forwarding and up to 30Mpps for VPLS forwarding (8/16 port card, with 1 forwarding engine)
- Support for 16K Bridge Domains, allowing the standard 4K VLANs to be reused across these bridge domains
- IPv4 Internet Group Management Protocol Version 3 (IGMPv3) snooping in hardware
- IPv6 Multicast Listener Discovery Version 2 (MLDv2) snooping in hardware
- Protocol Independent Multicast (PIM) source registers in hardware
- IPV4 and IPv6 in IPv6 tunneling, IPV4 and IPv6 in MPLS tunneling (6PE/6VPE)
- IPv6 in IPv4 tunneling (Intra-Site Automatic Tunnel Addressing Protocol [ISATAP], 6to4, GRE)
- Quality-of-Service (QoS) support for uniform, short pipe, and pipe mode tunnel; Hierarchical QoS
- Fast Link Notification (FLN) for hardware port state detection with 50ms
- MACsec (802.1ae) link-layer hardware AES 128 bit encryption
- Location ID Separation Protocol (LISP) hardware encapsulation
- Virtual Switch Header (VSH) and Virtual Network Tag (VNtag) hardware encapsulation for VSS and Instant Access
|
|
Queues |
Receive: - 1p7q4t (default)
- 2p6q4t (configurable)
Transmit: - 1p7q4t (default)
- 2p6q4t (configurable)
|
|
Queuing mechanisms |
- Class of Service (CoS) based queue mapping
- (Differentiated Service Code Point (DSCP) based queue mapping
|
|
Scheduler |
Ingress Queuing: - Deficit Weighted Round Robin (DWRR)
Egress Queuing: - Deficit Weighted Round Robin (DWRR)
◦ Weighted Random Early Detection (WRED)
- Shaped Round Robin (SRR)
◦ Weighted Random Early Detection (WRED)
- Class Based Weighted Fair Queuing (CBWFQ)
◦ 2 Level Traffic Shaping (HQoS)
◦ Low-Latency Queuing (LLQ)
|
|
Port buffers |
Oversubscription mode: - 250 MB per port (Egress)
- 1.2 MB per port (Ingress)
Performance mode: - 500 MB per port (Egress)
- 2.5 MB per port (Ingress)
|
|
Hardware multicast replication |
- Ingress and Egress replication-mode
- Approximately 20 Gbps per replication engine
- 8 replication engines per module
|
|
Jumbo frame support |
Up to 9216 bytes |
|
Can be used to form VSS Virtual Switch Link |
Yes (on all ports) |
|
Can be used to form Instant Access Remote Switch Link |
Yes (on all ports) |
|
Maximum 10G port density per chassis (not including supervisor uplinks) |
160 ports (6807-XL chassis) 352 ports (6513-E chassis) 256 ports (6509-E chassis) 160 ports (6506-E chassis) 96 ports (6504-E chassis) 64 ports (6503-E chassis) |
|
Maximum port density per VSS (not including supervisor uplinks) |
320 ports (6807-XL chassis) 704 ports (6513-E chassis) 512 ports (6509-E chassis) 320 ports (6506-E chassis) 192 ports (6504-E chassis) 128 ports (6503-E chassis) |
|
Supervisor engines supported |
Catalyst® 6500 Supervisor Engine 2T and 2TXL |
|
Chassis supported |
- Cisco Catalyst 6807-XL chassis
- Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS) and 6513-E
- Not supported in 6500 non-E Series chassis and 7600 Series Chassis
|
|
Slot requirements |
- Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis
- Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis
- Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis
|
|
Onboard memory |
2 GB default
|
|
Minimum IOS software release |
15.2(1)SY
|
|
Physical specifications |
- Occupies one slot in the Cisco Catalyst 6500 E-Series and 6807-XL chassis
- Dimensions (H x W x D): 1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm)
- Weight:
◦ 14.3 lb (6.5kg)
|
|
Power requirements |
587.60 Watts
|
Module quang sử dụng cho Line Card C6800-32P10G
|
Category |
Optics |
|
10G SFP+ Modules |
SFP-10G-SR |
|
SFP-10G-LRM |
|
|
SFP-10G-LR |
|
|
SFP-10G-ER |
|
|
SFP-10G-ZR |
|
|
DWDM-SFP10G (all 40 wavelengths) |
|
|
10G SFP+ Twinax Copper Cables |
SFP-H10GB-CU1M |
|
SFP-H10GB-CU3M |
|
|
SFP-H10GB-CU5M |
|
|
SFP-H10GB-ACU7M |
|
|
SFP-H10GB-ACU10M |
|
|
1G SFP Modules |
GLC-SX-MM |
|
GLC-SX-MMD |
|
|
GLC-LH-SM |
|
|
GLC-LH-SMD |
|
|
GLC-EX-SMD |
|
|
GLC-ZX-SM |
|
|
GLC-ZX-SMD |
|
|
GLC-BX-D |
|
|
GLC-BX-U |
|
|
1000BASE-T SFP Module |
GLC-T (Support 10/100/1000Mbps) |
|
100BASE-FX SFP Module |
GLC-GE-100FX |
Bạn đang cần tư vấn về sản phẩm: C6800-32P10G ?