Phân phối Bộ phát wifi Fortinet FAP-222C FortiAP 222C Outdoor Wireless Access Point 1x GE RJ45 port, dual radio (802.11 a/n/ac and 802.11 b/g/n, 2x2 MIMO), external antennas, ceiling/wall mount kit, PoE injector with AC power adapter included chính hãng giá tốt
Cam Kết Bán Hàng
✓ Đầy Đủ CO/CQ
✓ Hỗ Trợ Đại Lý Và Dự Án
✓ Giao Hàng Trên Toàn Quốc
✓ Sản Phẩm Chính Hãng™ 100%
✓ Cam Kết Giá Rẻ Nhất Thị Trường
✓ Bảo Hành, Đổi Trả Nhanh Chóng
✓ Hỗ Trợ Kỹ Thuật Chuyên Nghiệp, Nhiệt Tình
CNTTShop.vn - Trên 10 năm Uy tín cung cấp Thiết bị mạng & Dịch vụ Giải pháp mạng trên toàn quốc.
NTT03, Thống Nhất Complex, 82 Nguyễn Tuân, Thanh Xuân, Hà Nội. Số 31B, Đường 1, Phường An Phú, Quận 2 (Thủ Đức), TP HCM.Part Number |
:
|
List Price |
: $
|
Giá bán |
:
|
Bảo hành |
:
|
Made In |
:
|
Stock |
:
|
FortiAP FAP-222C được quản lý tập trung bởi bộ điều khiển WLAN tích hợp của bất kỳ thiết bị bảo mật FortiGate nào chạy hệ điều hành FortiOS hoặc có thể được quản lý thông qua dịch vụ quản lý FortiCloud miễn phí.
Fortinet FAP-222C được thiết kế theo tiêu chuẩn chống nước IP67 và có khả năng chịu được nhiệt độ cao, FAP-222C thích hợp cho việc triển khai trong điều kiện khắc nghiệt hay lắp ngoài trời. FAP-222C sử dụng ăng-ten bên ngoài chất lượng cao cho việc triển khai cầu nối hoặc mạng lưới quan trọng và đường dài.
Với sự tích hợp chức năng điều khiển không dây (wireless controller) vào các thiết bị FortiGate dẫn đầu thị trường, FortiAP FAP-222C hay các thiết bị AP khác của Fortinet đều có thể được quản lý tập trung. Điều này cho phép bạn dễ dàng triển khai, quản lý bảo mật có dây và không dây từ bảng điều khiển của 1 thiết bị duy nhất và bảo vệ mạng của bạn khỏi các mối đe dọa bảo mật mới nhất.
Hardware | |
Hardware Type | Outdoor IP67 rated, status LEDs, gore vent for pressure equalization |
Number of Radios | 2 |
Number of Antennas | 4 external N-Type |
Peak Antenna Gain | 3.5 dBi for 2.4 GHz, 6 dBi for 5 GHz |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Frequency of Radio 1 | 2.4 GHz b/g/n |
Frequency of Radio 2 | 5 GHz a/n/ac |
Maximum Data Rate | Radio 1: Up to 300 Mbps, Radio 2: Up to 867 Mbps |
Tx/Rx Streams | 2x2 MIMO with 2 spatial streams |
Ethernet Ports | 1x GE RJ45 |
USB Port | - |
Serial Console Port | - |
Power over Ethernet (PoE) | IEEE 802.3at or included PoE injector |
WME Multimedia Extensions | Yes (4 priority queues for voice, video, data and background traffic |
Simultaneous SSIDs | 16 (14 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power | 26 dBm (398 mW) |
Physical Security | Concrete and pole mount |
Mean Time Between Failures | > 7 years |
IEEE Specifications | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.1x, 802.3af, 802.11ac |
802.11ac 80 MHz Channel | Yes |
Mounting Options | Wall or pole |
Included Accessories | PoE injector with AC power adapter, pole mount kit, wall mount kit, grounding cable, surge protector (GPI-SGPT)**, 4x dipole antennas |
FortiPresence Capable | Yes |
802.11n Features | 20 MHz and 40 MHz High-Throughput (HT) Support Increased maximum frame transmission by incorporating A-MPDU and A-MSDU Packet Aggregation Conserve power via Dynamic MIMO power save |
Advanced 802.11n to enhance rate-over-range including: | Low-density parity check (LDPC) encoding Maximum likelihood demodulation (MLD) Maximum Ratio Combining (MRC) for improved receiver performance |
Wireless Monitoring Capabilities | |
Frequencies scanned | 2.4 and 5 GHz |
Background scan with client access on 2.4 and 5 GHz | Yes |
Full-time scan as dedicated monitor | Yes |
Full-time scan with client access on 5G GHz | No in AP mode |
Dimensions | |
Length x Width x Height | 9.8 x 8.7 x 2.1 inches (249 x 220 x 53 mm) |
Weight | 3.68 lbs (1.67 kg) |
Package (shipping) Weight | 9.1 lbs (4.31 kg) |
Environment | |
Power Supply | Proprietary PoE Injector Adapter Input: 100–240V AC, 50–60 Hz |
Power Consumption (Avg.) | 16 W |
Power Consumption (Max.) | 18.4 W |
Humidity | 5–90% non condensing |
Operating Temperature | -40–140°F (-40–60°C) |
Storage Temperature | -40–158°F (-40–70°C) |
Directives | Low Voltage Directive • RoHS |
Certifications | |
WiFi Alliance Certified | Yes |
DFS Certified for Europe | Yes |
SKU | Description |
SP-FAP222B-PA | Proprietary PoE injector with AC power adapter for FortiAP 222C |
SKU | Description |
FC-10-P0226-311-02-DD | 8x5 FortiCare Contract |
FC-10-P0226-247-02-DD | 24x7 FortiCare Contract |
FAP-FPL-PRO | FortiPlanner Wireless AP Deployment Planning Utility — Pro upgrade license unlocks FortiPlanner Lite (free version) to support more than 50 Access Points and includes site survey tool. Requires Windows 7. |
Bạn đang cần tư vấn về sản phẩm: #FAP-222C ?
Antena dùng cho FortiAP FAP-222C của quý khách bên em đã gửi giá vào email