| Hardware |
| Hardware Type |
Universal Wall Plate AP |
| Number of Radios |
1 (can operate as 2) |
| Number of Antennas |
2 |
| Peak Antenna Gain |
3 dBi for 2.4 GHz 4 dBi for 5 GHz |
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Frequency of Radio 1 |
2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (64 QAM) 5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM) 2x (1x1:1) 2.4 GHz and 5 GHz |
| Maximum Data Rate |
867 Mbps |
| Tx/Rx Streams |
2x2 MIMO 2 spatial stream (1x1 when operating in 2.4 and 5 GHz dual concurrent mode) |
| Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
| Ethernet Ports |
6 Ports, 1x GE 802.3at PoE (PD), 1x GE 802.3af PoE (PSE), 2x Non-PoE GE Ports, Pass-through in and Pass-through out |
| USB Port |
No |
| Serial Console Port |
No |
| Power over Ethernet (PoE) |
Yes |
| Simultaneous SSIDs |
16 (14 if background scanning enabled) |
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power |
20 dBm (100mW) |
| Physical Security |
Designed to attach to existing backbox |
| IEEE Specifications |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1x, 802.3af, 802.11ac, 802.3at, 802.3az, 802.3ad |
| Wireless Mesh Capable |
No |
| FortiPresence Capable |
Yes |
| Modes of Operation |
WLC (8.4 and above), FortiGate, FortiCloud |
| SSID Types Supported |
Local-Bridge, Tunnel & Mesh (when managed by FortiGate) |
| FortiDeploy and FortiCloud Key |
Yes |
| Per Radio Client Capacity |
Up to 128 |
| LED Off Mode |
Yes |
| Reg Domain |
International |
| Advanced 802.11 Features |
| 802.11ac MU-MIMO Wave 2 |
No |
| Transmit Beam Forming (TxBF) |
Yes |
| Low-Density Parity Check (LDPC) Encoding |
Yes |
| Maximum Likelihood Demodulation (MLD) |
Yes |
| Maximum Ratio Combining (MRC) |
Yes |
| A-MPDU and A-MSDU Packet Aggregation |
Yes |
| MIMO Power Save |
Yes |
| Short Guard Interval |
Yes |
| WME Multimedia Extensions |
Yes |
| Wireless Monitoring Capabilities |
| Frequencies scanned |
2.4 and 5 GHz |
| Background scan with client access on 2.4 and 5 GHz |
Yes (dependent on configuration) |
| Full-time scan as dedicated monitor |
Yes |
| Packet sniffer mode |
Yes |
| Spectrum analyzer |
Yes |
| Dimensions |
| Length x Width x Height |
6.1 x 3.7 x 1.2 inches (155 x 95 x 31 mm) |
| Weight |
9.1 oz (258 g) |
| Package (shipping) Weight |
21.4 oz (606 g) |
| Mounting Options |
Wall Mount or Desk Stand |
| Included Accessories |
Mounting Kit |
| Environment |
| Power Supply |
Adapter input: 100–240V, 50/60Hz, 0.9A Maximum output: 12V DC, 3A |
| Power Consumption (Average / Maximum) |
Depends on PoE connected and USB power consumed |
| Humidity |
10–90% non-condensing |
| Operating Temperature |
32–104°F (0–40°C) |
| Storage Temperature |
-22–158°F (-30–70°C) |
| Directives |
RoHS |
| UL2043 Plenum Material |
No |
| Mean Time Between Failures |
>30 Years |
| Certifications |
| WiFi Alliance Certified |
Yes |
| DFS Certified |
In Process |
Switch
.png){kind=icon}
.png){kind=logo}
Bạn đang cần tư vấn về sản phẩm: FAP-U24JEV-I ?
Chào anh/chị, báo giá bộ phát wifi FortiAP FAP-U24JEV-I đã được gửi vào mail của anh/chị.