Số 2A/125 Bùi Xương Trạch – Thanh Xuân – Hà Nội Bản đồ đến CNTTShop.vn
EX4550-32F-AFI Switch Juniper EX4550 32 Port 1/10GbE SFP+, 650WAC PS
Phân phối thiết bị mạng Switch Juniper EX4550-32F-AFI (EX4550 32F AFI) EX4550, 32 Port 1/10GbE SFP+ converged switch, 650 W AC PS, PSU side to port side airflow (optics sold separately) chính hãng giá tốt
Mã sản phẩm:
EX4550-32F-AFI
Tình trạng:
Còn hàng
Check Giá List
- Danh mục sản phẩm Switch Juniper 4000 Series
- Scenario
- Switch Type
- Số Cổng
- Routing/Switching
- Downlink Ports
- Uplink Ports
- Management
- Configurations
-
Features
- MPLS
EX4550-32F-AFI Switch Juniper EX4550 32 Port 1/10GbE SFP+, 650WAC PS, PSU side to port side airflow
Juniper Part Number : EX4550-32F-AFI
Bảo hành : 12 tháng
Made In : China
Stock : Liên hệ
Mô tả tổng quan
Thiết bị chuyển mạch Ethernet EX4550-32F-AFI của Juniper cung cấp giải pháp hiệu năng cao, linh hoạt và hiệu quả chi phí cho các môi trường truy cập dữ liệu, thoại và video của doanh nghiệp.
| View Datasheet EX4550-32F-AFI |
Để đơn giản hóa hoạt động của mạng, switch Juniper EX4550-32F-AFI sử dụng công nghệ Virtual Chassis kết hợp với High Availability (HA) cùng với các module uplink mở rộng cung cấp các giải pháp kinh tế, linh hoạt, hiệu suất cao, khả năng mở rộng và nâng cấp cho các doanh nghiệp.
Thiết bị mạng Juniper EX4550-32F-AFI cũng hỗ trợ công nghệ Virtual Chassis của Juniper Networks, cho phép 10 thiết bị chuyển mạch được kết nối với nhau qua các cổng uplink và được quản lý như một thiết bị duy nhất, cung cấp một giải pháp khả mở và khả năng mở rộng để mở rộng môi trường mạng.
Thông số kỹ thuật Switch Juniper EX4550-32F-AFI
| Hardware Specifications | |
| Interface Options | • 32 GbE/10GbE (MACsec 802.1AE capable) SFP/SFP+ fiber connectors • 16 10GbE SFP/SFP+ (MACsec 802.1AE capable) ports (via two optional 8-port expansion modules) • 4 40GbE QSFP+ ports (via two optional 2-port expansion modules) • 128 Gbps Virtual Chassis module with 2 x 64 Gbps ports • 1 x 10/100/1000 Ethernet RJ-45 ports for management • Console port for management |
| Dimensions | • Height: 1.72 in (4.37 cm); 1 U • Width: - 17.35 in (44.07 cm) without front-mounting brackets - 19 in (48.3 cm) with front-mounting brackets • Depth: 18.5 in (46.99 cm) • Weight: - EX4550 switch with 1 AC or DC power supply: 19.4 lb (8.8 kg) - AC power supply: 2.4 lb (1.1 kg) - DC power supply: 2.4 lb (1.1 kg) |
| Rack Installation Kit | Versatile two- and four-post mounting options for 19-in server rack or datacom rack |
| LEDs |
System LEDs that indicate status |
| CPU | 1.2 GHz |
| Memory | 2 GB DRAM, 2 GB flash |
| Switching Engine Model | Store and forward |
| Power | Dual hot-swappable load sharing AC and DC power supplies |
| Software Specifications | |
| Security | • RADIUS • TACACS+ • Access control lists (ACLs): Allow and deny • SSH v1, v2 • Secure interface login and password • Local proxy Address Resolution Protocol (ARP) • Static ARP support |
| Layer 2 Features | • Maximum number of media access control (MAC) addresses in hardware: 32,000* • Jumbo frames: 9,216 bytes • Number of VLANs: 4,096 • Port-based VLAN • 4,096 VLAN IDs supported • Routed VLAN interface (RVI) |
| Spanning Tree | • Rapid Spanning Tree Protocol (RSTP) and VLAN Spanning Tree Protocol (VSTP) running concurrently • Spanning Tree Protocol (802.1D) • Multiple Spanning Tree Protocol (MSTP) (802.1s) • RSTP (802.1w) • VSTP - VLAN Spanning Tree • BPDU protect • Loop protect • Root protect |
| Link Aggregation | • 802.3ad support - Number of LAGs supported: 64 - Maximum number of ports per LAG: 8 • LAG load-sharing algorithm—bridged or routed (unicast or multicast) traffic: - IP: S/D IP - TCP/UDP: S/D IP, S/D Port - Non-IP: S/D MAC - Tagged ports support in LAG |
| Quality of Service | • EZQoS • Class of service (CoS) on L3 VLAN • Per interface rewrite • Per interface classification • Policer mark down action • Remarking of bridged packets • Layer 2 QoS • Layer 3 QoS • Rate Limiting: - Ingress policing: 1 rate 2 color - Egress shaping: Per queue, per port - 8 hardware queues per port - Scheduling methods (egress): Strict priority (SP), shaped-deficit weighted round-robin (SDWRR) - 802.1p remarking - L2-L4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DiffServ code point (DSCP)/IP precedence, TCP/UDP port numbers, etc. - Congestion avoidance capabilities: Weighted tail drop eight queues |
| Layer 3 Features: IPv4 | • VRF-lite (IS-IS, RIP, OSPF, BGP) • IP directed broadcast traffic forwarding • Routing protocols: RIPv1/v2, OSPF, BGP, IS-IS • Maximum number of IPv4 unicast routes in hardware: 14,000* • Maximum number of IPv4 multicast routes in hardware: 4,000 • Static routing • Routing policy • Virtual Router Redundancy Protocol (VRRP) • Bidirectional Forwarding Detection (BFD) protocol |
| Layer 3 Features: IPv6 | • Maximum number of Neighbor Discovery Protocol (NDP) entries: 1,000 • Maximum number of IPv6 unicast routes in hardware: 3,400* • Maximum number of IPv6 multicast routes in hardware: 1,000 • Routing protocols: RIPng, OSPFv3, IPv6, BGP, MLDv2 • Static routing |
| Multicast | • VRF-lite (PIM, IGMP) • IGMP static • IGMP v1, v2, v3 • IGMP snooping • Protocol Independent Multicast–Sparse Mode (PIM-SM), and PIM source-specific multicast (PIM-SSM) • Multicast Source Discovery Protocol (MSDP) |
| Access control lists (ACLs) (Junos OS firewall filters) |
• Port-based ACL (PACL): Ingress and egress |
| Virtual Chassis Capabilities | • Maximum number of members: 10 • Virtual Chassis ports (VCPs): - Two dedicated 64 Gbps ports with 128 Gbps Virtual Chassis module - Any base or expansion port can act as a VCP • Maximum Virtual Chassis interconnect capacity: - 128 Gbps with Virtual Chassis module - 256 Gbps with two Virtual Chassis modules - 320 Gbps with two 40GbE expansion modules - Up to 48 x 10 Gbps using base or expansion ports (subject to a maximum of 8 members per LAG group per destination, 64 LAG groups per system or 110 LAG groups per Virtual Chassis configuration) • Maximum Virtual Chassis distance: - Virtual Chassis module ports: Up to 5 m with VCP cable - Base or expansion po |
| Data Center Bridging (DCB) | • Priority-based flow control (PFC): IEEE 802.1Qbb • Data Center Bridging Capability Exchange protocol (DCBX) |
| Fibre Channel over Ethernet (FCoE) | • FCoE transit switch (FIP snooping) • iSCI SAN • iSCI TLV support |
| High Availability | • Nonstop active routing (NSR): OSPF v2, RIP v1/v2, BGP, IS-IS, IGMP v1, v2, v3 • Redundant, hot-swappable power supplies • Redundant, field-replaceable, hot-swappable fans • GRES for Layer 2 hitless forwarding and Layer 3 protocols on Routing Engine failover • Graceful restart: OSPF, BGP, IGMP v1/v2/v3 snooping • Nonstop bridging for xSTP, Link Aggregation Control Protocol (LACP), Link Layer Discovery Protocol–Media Endpoint Discovery (LLDP/LLDP-MED) • Nonstop software upgrade (NSSU) for EX4550 with Virtual Chassis or EX4200/EX4550/EX4500 with Virtual Chassis • Virtual Chassis fast convergence (as low as sub-50 ms) |
| Traffic Mirroring | • Static LSPs • Port-based • VLAN-based • ACL-based mirroring • Mirroring destination ports per system: 1 • LAG port monitoring • Multiple destination ports monitored to 1 mirror (N:1) • Maximum number of mirroring sessions: 1 • Mirroring to remote destination (over L2): 1 destination VLAN |
|
Safety and Compliance |
|
| Safety Certifications | • UL-UL60950-1 (First Edition) • C-UL to CAN/CSA 22.2 No.60950-1 (First Edition) • TUV/GS to EN 60950-1, Amendment A1-A4, A11 • CB-IEC60950-1, all country deviations |
| Electromagnetic Compatibility Certifications | • FCC 47CFR Part 15 Class A • EN 55022 Class A • ICES-003 Class A • VCCI Class A • AS/NZS CISPR 22 Class A • CISPR 22 Class A • EN 55024 • EN 300386 • CE |
| Environmental | • Reduction of Hazardous Substances (ROHS) 5 • Telco • Common Language Equipment Identifier (CLEI) code |
| Environmental Ranges | • Operating temperature: 32° to 104° F (0° to 40° C) • Storage temperature: -40° to 158° F (-40° to 70° C) • Operating altitude: Up to 10,000 ft (3,048 m) • Nonoperating altitude: Up to 16,000 ft (4,877 m) • Relative humidity operating: 10% to 85% (noncondensing) • Relative humidity nonoperating: 0% to 95% (noncondensing) |
| Telco | TL9000 |
| Mean Time Between Failures (MTBF) | 166 khrs |
Power Supply và Fans có thể sử dụng cho Switch Juniper EX4550-32F-AFI
| JPSU-650W-AC-AFI | Juniper 650 W AC power supply for EX4550 (PSU-side airflow intake) |
| EX4550-FANMODULE-AFI | Fan module (PSU side to port side airflow) for EX4550 (spare) |
Uplink Module có thể sử dụng cho Switch Juniper EX4550-32F-AFI
| EX4550-VC1-128G | EX4550, 128 Gbps Virtual Chassis module (Virtual Chassis cables sold separately) |
| EX4550-EM-8XSFP | EX4550 8-port 10GbE SFP+ expansion module (optics sold separately) |
| EX4550-EM-8XT | EX4550 8-port 100/1G/10GBASE-T expansion module |
| EX4550-EM-2QSFP | EX4550 2-port 40GbE expansion module (optics sold separately) |
License có thể sử dụng cho Switch Juniper EX4550-32F-AFI
| EX4550-AFL | EX4550 advanced feature license for IS-IS, BGP, and MPLS |
| EX-QFX-MACSEC-ACC | MACsec Software License for EX4550 access switches |
| EX-QFX-MACSEC-AGG | MACsec Software License for EX4550 aggregation switches |
Module quang Juniper có thể sử dụng cho Switch Juniper EX4550-32F-AFI
| EX-SFP-10GE-ER | SFP+ 10GBASE-ER 10-Gigabit Ethernet Optics, 1550 nm for 40 km transmission on SMF |
| EX-SFP-10GE-ZR | SFP+ 10GBASE-ZR; LC connector; 1550 nm; 80 km reach on single-mode fiber |
| EX-SFP-10GE-LR | SFP+ 10GBASE-LR 10-Gigabit Ethernet Optics, 1310 nm for 10 km transmission on single-mode fiber-optic (SMF) |
| EX-SFP-10GE-LRM | SFP+ 10-Gigabit Ethernet LRM Optics, 1310 nm for 220m transmission on multimode fiberoptic (MMF) |
| EX-SFP-10GE-SR | SFP+ 10GBASE-SR 10-Gigabit Ethernet Optics, 850 nm for up to 300m transmission on MMF |
| EX-SFP-10GE-USR | SFP+ 10-Gigabit Ethernet Ultra Short Reach Optics, 850 nm for 10m on OM1, 20m on OM2, 100m on OM3 multimode fiber |
| EX-SFP-10GE-DAC-1M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 1m |
| EX-SFP-10GE-DAC-3M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 3m |
| EX-SFP-10GE-DAC-5M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 5m |
| EX-SFP-10GE-DAC-7M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 7m |
| EX-SFP-1GE-LX | SFP 1000BASE-LX Gigabit Ethernet Optics, 1310 nm for 10 km transmission on SMF |
| EX-SFP-1GE-SX | SFP 1000BASE-SX Gigabit Ethernet Optics, 850 nm for up to 550m transmission on MMF |
| EX-SFP-1GE-LH | SFP 1000BASE-LH Gigabit Ethernet Optics, 1550 nm for 70 km transmission on SMF |
| EX-SFP-1GE-T | SFP 10/100/1000BASE-T Copper Transceiver Module for up to 100m transmission on Category 5 |
| EX-SFP-GE10KT13R14 | SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1310 nm/Rx 1490 nm for 10 km transmission on single strand of SMF |
| EX-SFP-GE10KT13R15 | SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1310 nm/Rx 1550 nm for 10 km transmission on single strand of SMF |
| EX-SFP-GE10KT14R13 | SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1490 nm/Rx 1310 nm for 10 km transmission on single strand of SM |
| EX-SFP-GE10KT15R13 | SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1550 nm/Rx 1310 nm for 10 km transmission on single strand of SMF |
| QFX-QSFP-40G-SR4 | QSFP+ 40GBASE-SR4 40GbE optics, 850 nm for up to 150 m transmission on MMF |
| QFX-QSFP-DAC-1M | QSFP+ to QSFP+ Ethernet direct attach copper (twinax copper cable) 1m passive |
| QFX-QSFP-DAC-3M | QSFP+ to QSFP+ Ethernet direct attach copper (twinax copper cable) 3m passive |
Để có cấu hình, yêu cầu kỹ thuật chi tiết của Switch Juniper EX4550-32F-AFI cho vào hồ sơ tư vấn, thiết kế kỹ thuật hoặc cho vào hồ sơ mời thầu, quý khách vui lòng gửi email yêu cầu đến kinhdoanh@cnttshop.vn
Bạn cần báo giá tốt nhất!
Hỗ trợ kinh doanh
Mr. Lê Tuấn
0906 051 599
Ms. Phạm Quý
096 350 6565
Ms. Nguyễn Thủy
0962 052 874
Ms. Vũ Thị Kim Dung
0967 415 023
Ms Hoa
0868 142 066
Ms Vinh
0862 323 559
Ms Tuyên
Hỗ trợ kỹ thuật
0369 832 657
Mr. Hiếu
0981 264 462
Mr Vinh
0973 805 082
Mr Đạt
0941 164 370
Check giá trên mobile
Bạn đang cần tư vấn về sản phẩm: #EX4550-32F-AFI ?