Performance and Scalability |
Switching capacity (data rate, full duplex) |
180 Gbps |
Forwarding capacity (data rate, full duplex) |
134 Mpps |
10/100/1000 Mbps RJ45 downlinks |
48 |
10/100/1000 Mbps RJ45 uplinks (full duplex only, no PoE) |
2 |
1/10 Gbps SFP/SFP+ uplinks |
4 (with license) |
Base IPv4/v6 Layer 3 routing (static routing, RIP) |
Yes |
Advanced IPv4/v6 Layer 3 routing (OSPF, VRRP, PIM, PBR features) |
With license |
Aggregated stacking bandwidth (data rate, full duplex) |
480 Gbps |
Stacking density (maximum switches in a stack) |
12 |
Stacking ports (maximum ports usable for stacking) |
Up to 4×10 GbE SFP+ |
Maximum stacking distance (distance between stacked switches) |
10 km |
Campus Fabric |
Fabric Port Extender (PE) |
Power |
Power inlet (AC) |
C14 |
Input voltage/frequency |
AC: 100 to 240 VAC @ 50 to 60 Hz |
Power supply rated maximum (AC) |
65 W |
Switch power consumption (25°C)
Idle (no PoE load)
10% traffic (full PoE load)
100% traffic (full PoE load) |
24 W
38 W
39 W |
Airflow |
Fanless |
Switch heat dissipation (25°C)
Idle (no PoE load)
10% traffic (full PoE load)
100% traffic (full PoE load) |
83 BTU/hr
131 BTU/hr
132 BTU/hr |
ENVIRONMENT |
Net Weight (Kg) |
4.82 |
Dimensions (mm) |
440 (W) x 370 (D) x 43.65 (H) |
Acoustics (25°C, min fan speed) |
Fanless |
MTBF (25°C) |
714,420 hours |
SPECIFICATIONS |
Connector options |
- 10/100/1000 Mbps RJ-45
- 1 Gbps SFP ports
- 1/10 Gbps SFP+ ports
- Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
- Console management: RJ45 serial port and USB Type-C port with serial communication device class support
- File transfer: USB port, standard-A plug |
DRAM |
1 GB |
NVRAM (Flash) |
2 GB |
Packet buffer size |
12/24 port: 2 MB, 48 port: 4 MB |
Maximum MAC addresses |
16,384 |
Maximum VLANs
Maximum PVLANs |
- 4,095
- 32 |
Maximum STP (spanning trees instances) |
254 |
Maximum VEs |
128 |
Maximum ARP entries |
4,094 |
Maximum routes (in hardware) |
- 1,000 (IPv4), 1,000 (IPv6)
- Next hop address: 4,094 |
Trunking |
- Maximum ports per trunk: 16
- Maximum trunk groups: 128 |
Maximum jumbo frame size |
9,216 bytes |
QoS priority queues |
8 per port |
Multicast groups |
- 3,072 (Layer 2)
- 2,048 (Layer 3) |
Quality of Service (QoS) |
- ACL Mapping and Marking of ToS/DSCP (CoS)
- ACL Mapping and Marking of 802.1p
- ACL Mapping to Priority Queue
- Classifying and Limiting Flows Based on TCP Flags
- DiffServ Support
- Honoring DSCP and 802.1p (CoS)
- MAC Address Mapping to Priority Queue
- Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP |
Traffic management |
- ACL-based inbound rate limiting and traffic policies
- Broadcast, multicast, and unknown unicast rate limiting
- Inbound rate limiting per port
- Outbound rate limiting per port and per queue |
Security |
- 802.1X authentication
- MAC authentication
- Flexible authentication
- Web authentication
- DHCP snooping
- Dynamic ARP inspection
- Neighbor Discovery (ND) Inspection
- Bi-level Access Mode (Standard and EXEC Level)
- EAP pass-through support
- IEEE 802.1X username export in sFlow
- Protection against Denial of Service (DoS) attacks
- Authentication, Authorization, and Accounting (AAA)
- MAC Address Locking MAC Port Security
- Advanced Encryption Standard (AES) with SSHv2
- RADIUS/TACACS/TACACS+
- Secure Copy (SCP)
- Secure Shell (SSHv2)
- Protected Ports
- Local Username/Password
- Change of Authorization (CoA) RFC 5176
- Trusted Platform Module
- RADSEC (RFC 6614)
- Encrypted Syslog (RFC 5425) |
SDN features |
- OpenFlow v1.0 and v1.3
- OpenFlow with hybrid port mode
- Operates with an OpenDayLight Controller |
High availability |
- Layer 3 VRRP/VRRP-E protocol redundancy
- Real-time state synchronization across the stack
- Hitless failover and switchover from master to standby stack controller
- Hot insertion and removal of stacked units
- Layer 2 VSRP switch redundancy
- In Service Software Update (ISSU) |
FEATURE SETS |
Layer 2 feature set |
- 802.1s Multiple Spanning Tree
- 802.1x Authentication
- Auto MDI/MDIX
- BPDU Guard, Root Guard
- Dual-Mode VLANs
- MAC-based VLANs, Dynamic MAC-based VLAN activation
- Dynamic VLAN Assignment
- Dynamic Voice VLAN Assignment
- Fast Port Span
- GVRP: GARP VLAN Registration Protocol
- IGMP Snooping (v1/v2/v3)
- IGMP Proxy for Static Groups
- IGMP v2/v3 Fast Leave
- Inter-Packet Gap (IPG) adjustment
- Link Fault Signaling (LFS)
- MAC Address Filtering
- MAC Learning Disable
- MLD Snooping (v1/v2)
- Multi-device Authentication
- Per-VLAN Spanning Tree (PVST/PVST+/PRST)
- Mirroring: Port-based, ACL-based, MAC Filter-based, and VLAN-based - PIM-SM v2 Snooping
- Port Loop Detection
- Private VLAN
- Remote Fault Notification (RFN)
- Single-instance Spanning Tree
- Trunk Groups (static, LACP)
- Uni-Directional Link Detection (UDLD)
- Metro-Ring Protocol (MRP) (v1, v2)
- Virtual Switch Redundancy Protocol (VSRP)
- Q-in-Q and selective Q-in-Q
- VLAN Mapping
- Topology Groups |
Base Layer 3 IP routing feature set |
- IPv4 and IPv6 static routes
- RIP v1/v2, RIPng
- ECMP
- Port-based Access Control Lists
- Layer 3/Layer 4 ACLs
- Host routes
- Virtual Interfaces
- Routed Interfaces
- Route-only Support
- Routing Between Directly Connected Subnets |
Premium Layer 3 IP routing feature set with software license |
- IPv4 and IPv6 dynamic routes
- OSPF v2, v3
- PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6)
- PBR Virtual Route Redundancy Protocol VRRP (IPv4)
- VRRP v3 (IPv6)
- VRRP-E(IPv4/IPv6) |
STANDARD COMPLIANCE |
IEEE standards compliance |
- 802.1AB LLDP/ LLDP-MED
- 802.1D MAC Bridging
- 802.1p Mapping to Priority Queue
- 802.1s Multiple Spanning Tree (MST)
- 802.1w Rapid Reconfiguration of Spanning Tree (RSTP)
- 802.1x Port-based Network Access Control (PNAC)
- 802.3 Carrier Sense Multiple Access/Collision Detection (CSMA/CD)
- 802.3ab 1000BASE-T
- 802.3 10Base-T
- 802.3ad Link Aggregation (Dynamic and Static)
- 802.1 AX-2008 Link Aggregation
- 802.3ae 10 Gigabit Ethernet
- 802.3af Power over Ethernet
- 802.3at Power over Ethernet Plus
- 802.3bz Multigigabit Ethernet
- 802.3u 100Base-TX
- 802.3x Flow Control
- 802.3z 1000Base-SX/LX
- 802.3 MAU MIB (RFC 2239)
- 802.1Q VLAN Tagging
- 802.1BR Bridge Port Extension
- 802.3az Energy Efficient Ethernet* (hardware ready) |
ENVIRONMENT |
Temperature |
Operating temperature: -5°C to 45°C
Storage temperature: −25°C to 70°C |
Humidity |
Operating relative humidity: 5% to 95% at 45°C, non-condensing
Non-operating relative humidity: 0% to 95% at 70°C, non-condensing |
Altitude |
Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 39,000 ft (12,000 m) maximum |
COMPLIANCE/CERTIFICATION |
Electromagnetic emissions |
FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker; EN 61000-6-3 Emission Standard (supersedes: EN 50081-1) |
Safety |
CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1 Second Edition; IEC 60950-1 Second Edition; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification, Requirements and User’s Guide; EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems |
Immunity |
EN 61000-6-1 Generic Immunity and Susceptibility (supersedes EN 50082-1); EN 55024 Immunity Characteristics (supersedes EN 61000-4-2 ESD); EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags |
Environmental regulatory compliance |
RoHS-compliant (6 of 6); WEEE-compliant |
Vibration |
IEC 68-2-36, IEC 68-2-6 |
Shock and drop |
IEC 68-2-27, IEC 68-2-32 |
Bạn đang cần tư vấn về sản phẩm: ICX7150-48-4X1G ?
Chào anh/chị, báo giá switch Ruckus ICX7150-48-4X1G đã được gửi vào mail của anh/chị.