| Performance and Scalability | 
| Switching capacity (data rate, full duplex) | 180 Gbps | 
| Forwarding capacity (data rate, full duplex) | 134 Mpps | 
| 10/100/1000 Mbps RJ45 downlinks | 48 | 
| 10/100/1000 Mbps RJ45 uplinks (full duplex only, no PoE) | 2 | 
| 1/10 Gbps SFP/SFP+ uplinks | 4 (2 with license) | 
| PoE/PoE+ ports | 48 | 
| Maximum PoE Class 3 ports (15.4 W per port) | 48 | 
| Maximum PoE+ Class 4 ports (30 W per port) | 24 | 
| Base IPv4/v6 Layer 3 routing (static routing, RIP) | Yes | 
| Advanced IPv4/v6 Layer 3 routing (OSPF, VRRP, PIM, PBR features) | With license | 
| Aggregated stacking bandwidth (data rate, full duplex) | 480 Gbps | 
| Stacking density (maximum switches in a stack) | 12 | 
| Stacking ports (maximum ports usable for stacking) | Up to 4×10 GbE SFP+ | 
| Maximum stacking distance (distance between stacked switches) | 10 km | 
| Campus Fabric | Fabric Port Extender (PE) | 
| Power | 
| Power inlet (AC) | C14 | 
| Input voltage/frequency | AC: 100 to 240 VAC @ 50 to 60 Hz | 
| Power supply rated maximum (AC) | 880 W | 
| PoE power budget (AC) | 740 W | 
| Switch power consumption (25°C) Idle (no PoE load)
 10% traffic (full PoE load)
 100% traffic (full PoE load)
 | 50 W
 869 W
 893 W
 | 
| Airflow | Side-to-back | 
| Switch heat dissipation (25°C) Idle (no PoE load)
 10% traffic (full PoE load)
 100% traffic (full PoE load)
 | 170 BTU/hr
 2964 BTU/hr
 3049 BTU/hr
 | 
| ENVIRONMENT | 
| Net Weight (Kg) | 6.28 | 
| Dimensions (mm) | 440 (W) x 370 (D) x 43.65 (H) | 
| Acoustics (25°C, min fan speed) | 47.7 dBA | 
| MTBF (25°C) | 312,241 hours | 
| SPECIFICATIONS | 
| Connector options | • 10/100/1000 Mbps RJ-45 • 1 Gbps SFP ports
 • 1/10 Gbps SFP+ ports
 • Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
 • Console management: RJ45 serial port and USB Type-C port with serial communication device class support
 • File transfer: USB port, standard-A plug
 | 
| DRAM | 1 GB | 
| NVRAM (Flash) | 2 GB | 
| Packet buffer size | 12/24 port: 2 MB, 48 port: 4 MB | 
| Maximum MAC addresses | 16,384 | 
| Maximum VLANs Maximum PVLANs
 | • 4,095 • 32
 | 
| Maximum STP (spanning trees instances) | 254 | 
| Maximum VEs | 128 | 
| Maximum ARP entries | 4,094 | 
| Maximum routes (in hardware) | • 1,000 (IPv4), 1,000 (IPv6) • Next hop address: 4,094
 | 
| Trunking | • Maximum ports per trunk: 16 • Maximum trunk groups: 128
 | 
| Maximum jumbo frame size | 9,216 bytes | 
| QoS priority queues | 8 per port | 
| Multicast groups | • 3,072 (Layer 2) • 2,048 (Layer 3)
 | 
| Quality of Service (QoS) | • ACL Mapping and Marking of ToS/DSCP (CoS) • ACL Mapping and Marking of 802.1p
 • ACL Mapping to Priority Queue
 • Classifying and Limiting Flows Based on TCP Flags
 • DiffServ Support
 • Honoring DSCP and 802.1p (CoS)
 • MAC Address Mapping to Priority Queue
 • Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
 | 
| Traffic management | • ACL-based inbound rate limiting and traffic policies • Broadcast, multicast, and unknown unicast rate limiting
 • Inbound rate limiting per port
 • Outbound rate limiting per port and per queue
 | 
| Security | • 802.1X authentication • MAC authentication
 • Flexible authentication
 • Web authentication
 • DHCP snooping
 • Dynamic ARP inspection
 • Neighbor Discovery (ND) Inspection
 • Bi-level Access Mode (Standard and EXEC Level)
 • EAP pass-through support
 • IEEE 802.1X username export in sFlow
 • Protection against Denial of Service (DoS) attacks
 • Authentication, Authorization, and Accounting (AAA)
 • MAC Address Locking MAC Port Security
 • Advanced Encryption Standard (AES) with SSHv2
 • RADIUS/TACACS/TACACS+
 • Secure Copy (SCP)
 • Secure Shell (SSHv2)
 • Protected Ports
 • Local Username/Password
 • Change of Authorization (CoA) RFC 5176
 • Trusted Platform Module
 • RADSEC (RFC 6614)
 • Encrypted Syslog (RFC 5425)
 | 
| SDN features | • OpenFlow v1.0 and v1.3 • OpenFlow with hybrid port mode
 • Operates with an OpenDayLight Controller
 | 
| High availability | • Layer 3 VRRP/VRRP-E protocol redundancy • Real-time state synchronization across the stack
 • Hitless failover and switchover from master to standby stack controller
 • Hot insertion and removal of stacked units
 • Layer 2 VSRP switch redundancy
 • In Service Software Update (ISSU)
 | 
| FEATURE SETS | 
| Layer 2 feature set | • 802.1s Multiple Spanning Tree • 802.1x Authentication
 • Auto MDI/MDIX
 • BPDU Guard, Root Guard
 • Dual-Mode VLANs
 • MAC-based VLANs, Dynamic MAC-based VLAN activation
 • Dynamic VLAN Assignment
 • Dynamic Voice VLAN Assignment
 • Fast Port Span
 • GVRP: GARP VLAN Registration Protocol
 • IGMP Snooping (v1/v2/v3)
 • IGMP Proxy for Static Groups
 • IGMP v2/v3 Fast Leave
 • Inter-Packet Gap (IPG) adjustment
 • Link Fault Signaling (LFS)
 • MAC Address Filtering
 • MAC Learning Disable
 • MLD Snooping (v1/v2)
 • Multi-device Authentication
 • Per-VLAN Spanning Tree (PVST/PVST+/PRST)
 • Mirroring: Port-based, ACL-based, MAC Filter-based, and VLAN-based • PIM-SM v2 Snooping
 • Port Loop Detection
 • Private VLAN
 • Remote Fault Notification (RFN)
 • Single-instance Spanning Tree
 • Trunk Groups (static, LACP)
 • Uni-Directional Link Detection (UDLD)
 • Metro-Ring Protocol (MRP) (v1, v2)
 • Virtual Switch Redundancy Protocol (VSRP)
 • Q-in-Q and selective Q-in-Q
 • VLAN Mapping
 • Topology Groups
 | 
| Base Layer 3 IP routing feature set | • IPv4 and IPv6 static routes • RIP v1/v2, RIPng
 • ECMP
 • Port-based Access Control Lists
 • Layer 3/Layer 4 ACLs
 • Host routes
 • Virtual Interfaces
 • Routed Interfaces
 • Route-only Support
 • Routing Between Directly Connected Subnets
 | 
| Premium Layer 3 IP routing feature set with software license | • IPv4 and IPv6 dynamic routes • OSPF v2, v3
 • PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6)
 • PBR  Virtual Route Redundancy Protocol VRRP (IPv4)
 • VRRP v3 (IPv6)
 • VRRP-E(IPv4/IPv6)
 | 
| STANDARD COMPLIANCE | 
| IEEE standards compliance | • 802.1AB LLDP/ LLDP-MED • 802.1D MAC Bridging
 • 802.1p Mapping to Priority Queue
 • 802.1s Multiple Spanning Tree (MST)
 • 802.1w Rapid Reconfiguration of Spanning Tree (RSTP)
 • 802.1x Port-based Network Access Control (PNAC)
 • 802.3 Carrier Sense Multiple Access/Collision Detection (CSMA/CD)
 • 802.3ab 1000BASE-T
 • 802.3 10Base-T
 • 802.3ad Link Aggregation (Dynamic and Static)
 • 802.1 AX-2008 Link Aggregation
 • 802.3ae 10 Gigabit Ethernet
 • 802.3af Power over Ethernet
 • 802.3at Power over Ethernet Plus
 • 802.3bz Multigigabit Ethernet
 • 802.3u 100Base-TX
 • 802.3x Flow Control
 • 802.3z 1000Base-SX/LX
 • 802.3 MAU MIB (RFC 2239)
 • 802.1Q VLAN Tagging
 • 802.1BR Bridge Port Extension
 • 802.3az Energy Efficient Ethernet* (hardware ready)
 | 
| ENVIRONMENT | 
| Temperature | Operating temperature: -5°C to 45°C Storage temperature: −25°C to 70°C
 | 
| Humidity | Operating relative humidity: 5% to 95% at 45°C, non-condensing Non-operating relative humidity: 0% to 95% at 70°C, non-condensing
 | 
| Altitude | Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 39,000 ft (12,000 m) maximum | 
| COMPLIANCE/CERTIFICATION | 
| Electromagnetic emissions | FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker; EN 61000-6-3 Emission Standard (supersedes: EN 50081-1) | 
| Safety | CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1 Second Edition; IEC 60950-1 Second Edition; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification, Requirements and User’s Guide; EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems | 
| Immunity | EN 61000-6-1 Generic Immunity and Susceptibility (supersedes EN 50082-1); EN 55024 Immunity Characteristics (supersedes EN 61000-4-2 ESD); EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags | 
| Environmental regulatory compliance | RoHS-compliant (6 of 6); WEEE-compliant | 
| Vibration | IEC 68-2-36, IEC 68-2-6 | 
| Shock and drop | IEC 68-2-27, IEC 68-2-32 | 
 
Bạn đang cần tư vấn về sản phẩm: ICX7150-48PF-2X10G ?
Chào anh/chị, báo giá switch Ruckus ICX7150-48PF-2X10G đã được gửi vào mail của anh/chị.