Add Switch
In the upper left corner, select the network, the device type [Switch], fill in the serial number and device name, the device name cannot be repeated in the tenant range, and the serial number cannot be repeated in the entire network range, the items with are required, and finally click [OK] to add the device, as shown below:
Figure 1-6-31 Add a switch
If the serial number of the device is repeated, the page prompts as follows:
Figure 1-6-32 The prompt for serial number repeated
When adding a device with a duplicate name, it will prompt "The device name is duplicated within the tenant range, failed to add":
Figure 1-6-33 Prompt for repeated device name
-
The following converged gateways, routers, ACs, and bridges all have new devices, and the operations are similar, so the details will not be described later.
Switch
.png){kind=icon}
.png){kind=logo}
