Cam Kết Bán Hàng
✓ Đầy Đủ CO/CQ
✓ Hỗ Trợ Đại Lý Và Dự Án
✓ Giao Hàng Trên Toàn Quốc
✓ Sản Phẩm Chính Hãng™ 100%
✓ Cam Kết Giá Rẻ Nhất Thị Trường
✓ Bảo Hành, Đổi Trả Nhanh Chóng
✓ Hỗ Trợ Kỹ Thuật Chuyên Nghiệp, Nhiệt Tình
CNTTShop.vn - Trên 10 năm Uy tín cung cấp Thiết bị mạng & Dịch vụ Mạng trên toàn quốc.
NTT03, Thống Nhất Complex, Thanh Xuân, Hà Nội. Số 31B, Đường 1, Phường An Phú, Quận 2 (Thủ Đức), TP HCM.Ruckus Part Number : ICX7450-48P
List Price : $6,795
Bảo hành : 12 tháng
Made In : China
Stock : Liên hệ
Thiết bị chuyển mạch Switch Ruckus ICX7450-48P mang lại hiệu suất, tính linh hoạt và khả năng mở rộng cần thiết cho việc triển khai truy cập Gigabit Ethernet (GbE) của doanh nghiệp. Switch Ruckus ICX7450-48P cung cấp mật độ xếp chồng hàng đầu thị trường với tối đa 12 switch (cổng 576x 1 GbE và 144x 1/10 GbE) trên mỗi ngăn xếp.
View Datasheet ICX7450-48P |
Ngoài ra, thiết bị mạng Switch Ruckus ICX7450-48P là giải pháp chuyển đổi có thể xếp chồng đầu tiên trong ngành để tận dụng các lợi thế của bảo mật VPN IPsec tại chỗ để đảm bảo tính toàn vẹn dữ liệu đầu cuối mà không cần các thiết bị mã hóa chuyên dụng.
Thông số kỹ thuật Switch Ruckus ICX7450-48P
Lưu ý: Các tính năng OSPF, VRRP, PIM, PBR, VRF yêu cầu phải active license ICX7450-PREM-LIC để sử dụng
Performance and Scalability | |
Switching capacity (data rate, full duplex) | 336 Gbps |
Forwarding capacity (data rate, full duplex) | 250 Mpps |
Fixed ports: 10/100/1000 Mbps RJ45 | 48 |
Modular slots | 3 |
Modular ports: 1 Gbps SFP (max.) | 4 |
Modular ports: 1/10 GbE SFP/ SFP+ (max.) | 12 |
Modular ports: 1/10GBASE-T RJ45 (max.) | 12 |
Modular ports: 40 GbE QSFP+ (max.) | 2 |
Modular service: IPsec VPN | With module |
Maximum PoE class 3 ports (15.4 W per port) | 48 (1 AC PSU) |
Maximum PoE+ ports (30 W per port) | 48 (2 AC PSU) |
Maximum IEEE 802.3bt ready ports (90 W per port) | 8 (1 AC PSU) |
Base IPv4/v6 Layer 3 routing (RIP, static routing) | yes |
Advanced IPv4/v6 Layer 3 routing (OSPF, BGP, VRRP, PIM, PBR, VRF) | With license |
Aggregated stacking bandwidth | 960 Gbps |
Stacking density (maximum switches in a stack) | 12 |
Stacking ports (maximum ports usable for stacking) | Up to 4×10 GbE SFP+ or 2×40 GbE QSFP+ |
Maximum stacking distance (distance between stacked switches) | 10 km |
Campus Fabric | Fabric Port Extender (PE) |
Power | |
Power inlet (AC) | C14 |
Input voltage/frequency | AC: 100 to 240 VAC @ 50 to 60 Hz | DC: 40 to 60 VDC |
Maximum current draw (at 100 VAC, one power supply) | 12.5 Amp |
Power supply rated maximum output (AC) | 2×1,000 W |
Power supply rated maximum output (DC) | 2×510 W |
PoE power budget (AC) (two AC power supplies) | 1,500 W |
PoE power budget (DC) (two DC power supplies) | 516 W |
Switch power consumption3 (25°C) Idle (no PoE load) 10% traffic4 (full PoE load) 100% traffic4 (full PoE load) |
106 W 930 W 935 W |
Airflow |
Reversible, front-to-back, or back-to-front |
Switch heat dissipation (25°C)3 Idle (no PoE load) 10% traffic2 (full PoE load) 100% traffic2 (full PoE load) |
362 BTU/hour |
ENVIRONMENT | |
Net Weight (Kg) | 7.2 kg (15.87 lb) |
Dimensions (mm) | 440 mm (17.323 in.) W × 393.7 mm (15.5 in.) D × 43.7 mm (1.720 in.) H; 1U |
Acoustics (25°C, min fan speed) | 49 dBA |
MTBF (25°C) | 444,360 hours |
SPECIFICATIONS | |
Connector options | • 10/100/1000 Mbps, 10 Gbps 10GBASE-T ports: RJ-45 • 100 Mbps SFP ports • 1 Gbps SFP ports • 10 Gbps SFP+ ports • 40 Gbps QSFP+ ports • Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 • Console management: Mini-USB RS232 serial port (Mini-B plug) • File Transfer: USB port, standard-A plug |
DRAM | 2 GB |
NVRAM (Flash) | 2 GB |
Packet buffer size | 8 MB |
Maximum MAC addresses | 32,768 |
Maximum VLANs Maximum PVLANs |
• 4,095 • 32 |
Maximum STP (spanning trees instances) | 254 |
Maximum VEs | 255 |
Maximum routes (in hardware) | • 15,168 (IPv4) • 5,120 (IPv6) • 16,000 (Next Hop Addresses) |
Trunking | • Maximum ports per trunk: 16 • Maximum trunk groups: 256 |
Maximum jumbo frame size | 9,216 bytes |
Average latency | 1.3 μs |
QoS priority queues | 8 per port |
IPsec performance | • Maximum throughput: 10 Gbps, full-duplex • Maximum tunnels: 100 (IPv4 and IPv6) |
VRF | 32 |
Multicast groups | • 8,192 (Layer 2) • 8,192 (Layer 3) |
FEATURE SETS | |
Layer 2 feature set | • 802.1s Multiple Spanning Tree • 802.1x Authentication • Auto MDI/MDIX • BPDU Guard, Root Guard • Dual-Mode VLANs • MAC-based VLANs, Dynamic MAC-based VLAN activation • Dynamic Voice VLAN Assignment • Dynamic VLAN Assignment • Fast Port Span • GVRP: GARP VLAN Registration Protocol • IGMP Snooping (v1/v2/v3) • IGMP Proxy for Static Groups • IGMP v2/v3 Fast Leave • Inter-Packet Gap (IPG) adjustment • Link Fault Signaling (LFS) • MAC Address Filtering • MAC Learning Disable • MLD Snooping (v1/v2) • Multi-device Authentication • Per-VLAN Spanning Tree (PVST/PVST+/PVRST) • Mirroring - Port-based, ACL-based, MAC Filter-based, and VLAN-based • PIM-SM v2 Snooping • Port Loop Detection • Private VLAN • Remote Fault Notification (RFN) • Single-instance Spanning Tree • Trunk Groups (static, LACP) • Uni-Directional Link Detection (UDLD) • Metro-Ring Protocol (MRP) (v1, v2) • Virtual Switch Redundancy Protocol (VSRP) • Q-in-Q and selective Q-in-Q • VLAN Mapping • Topology Groups |
Base Layer 3 IP routing | • IPv4 and IPv6 static routes − RIP v1/v2, RIPng • ECMP • Port-based Access Control Lists • Layer 3/Layer 4 ACLs • Host routes • Virtual interfaces • Routed interfaces • Route-only support • Routing between directly connected subnets |
Premium Layer 3 IP routing (require license) | • IPv4 and IPv6 dynamic routes • OSPF v2, OSPF v3 (IPv6) • PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6 multicast routing functionality) • PBR • Virtual Route Redundancy Protocol VRRP v3 (IPv6) • VRRP-E (IPv4, IPv6) • BGP4, BGP4+ (IPv6) • GRE • IPv6 over IPv4 tunnels • VRF (IPv4 and IPv6) • MSDP |
Quality of Service (QoS) | • ACL Mapping and Marking of ToS/DSCP • ACL Mapping and Marking of 802.1p • ACL Mapping to Priority Queue • Classifying and Limiting Flows Based on TCP Flags • DiffServ Support • Honoring DSCP and 802.1p • MAC Address Mapping to Priority Queue • Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP • Priority Flow Control |
Traffic management | • ACL-based inbound rate limiting and traffic policies • Broadcast, multicast, and unknown unicast rate limiting • Inbound rate limiting per port • Outbound rate limiting per port and per queue |
Security | • IPsec 128/256 AES-GCM (with service module) • MACsec • 802.1X Authentication • MAC Authentication • Flexible authentication • Web authentication • DHCP snooping • Dynamic ARP inspection • Neighbor Discovery (ND) Inspection • Bi-level Access Mode (Standard- and EXEC-level) • EAP pass-through support • IEEE 802.1X username export in sFlow • Protection against Denial of Service (DoS) attacks • Authentication, Authorization, and Accounting (AAA) • MAC Address Locking MAC Port Security • Advanced Encryption Standard (AES) with SSHv2 • RADIUS/TACACS/TACACS+ • Secure Copy (SCP) • Secure Shell (SSHv2) • Protected Ports • Local Username/Password • Change of Authorization (CoA) RFC 5176 • RFC Conformance for Encryption: • RFC 5996 Internet Key Exchange Protocol Version 2 (IKEv2) • RFC 4303 IP Encapsulating Security Payload (ESP) • RFC 6379 Suite B Cryptographic Suites for IPsec (SuiteB-GCM-256 and Suite-B-GCM-128) • RFC 5903 Elliptic Curve Groups Modulo a Prime (ECP Groups) for IKEv2 • RFC 4868 Using HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512 with IPsec • RFC 4754 IKEv2 Authentication Using the Elliptic Curve Digital Signature Algorithm (ECDSA) • RFC 4106 The use of Galois/Counter Mode (GCM) in IPsec Encapsulating Security Payload (ESP)SP800-56A Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography • Encrypted Syslog (RFC 5425) • RADSEC (RFC 6614) |
High availability (require license) | • Redundant hot-swappable power supplies • Hot-swappable fan trays • Layer 3 VRRP/VRRP-E protocol redundancy • Real-time state synchronization across the stack • Hitless failover and switchover from master to standby stack controller • Hot insertion and removal of stacked units • Layer 2 VSRP switch redundancy • In Service Software Update (ISSU) |
SDN features | • Support for OpenFlow v1.0 and v1.3 • OpenFlow support with hybrid port mode • Operates with OpenDaylight SDN Controllers and the applications running on the controller |
STANDARD COMPLIANCE | |
IEEE standards compliance | • 802.1AB LLDP • 802.1D MAC Bridging • 802.1p Mapping to Priority Queue • 802.1s Multiple Spanning Tree (MST) • 802.1w Rapid Reconfiguration of Spanning Tree • 802.1x Port-based Network Access Control (PNAC) • 802.3 Carrier Sense Multiple Access/Collision Detection (CSMA/CD) • 802.3ab 1000BASE-T • 802.1 AX-2008 Link Aggregation • 802.3ae 10 Gigabit Ethernet • 802.3af Power over Ethernet • 802.3at Power over Ethernet Plus • 802.3u 100Base-TX • 802.3x Full duplex and Flow Control • 802.3z 1000Base-SX/LX • 802.3 MAU MIB (RFC 2239) • 802.3ba 40 and 100 Gbps Ethernet • 802.1AE-MACsec (with license) • 802.3az Energy Efficient Ethernet • 802.1Q VLAN Tagging • 802.1BR Bridge Port Extension |
ENVIRONMENT | |
Temperature | Operating temperature: −5°C to 50°C/23°F to 122°F Storage temperature: −40°C to 70°C/−40°F to 158°F |
Humidity | Operating relative humidity: 10% to 90% at 50°C, non-condensing Non-operating relative humidity: 5% to 95% at 70°C, non-condensing |
Altitude | Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 39,000 ft (12,000 m) maximum |
COMPLIANCE/CERTIFICATION | |
Electromagnetic emissions | FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker EN 61000-6-3 Emission Standard |
Safety | CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1; IEC60950-1; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products |
Immunity | EN 61000-6-1 Generic Immunity and Susceptibility; EN 55024 Immunity Characteristics; EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags |
Environmental regulatory compliance | RoHS-compliant (6 of 6); WEEE-compliant |
Vibration | IEC 68-2-36, IEC 68-2-6 |
Shock and drop | IEC 68-2-27, IEC 68-2-32 |
Lưu ý: Module quang Ruckus được sử dụng khi lắp thêm các module ICX7400-4X1GF, ICX7400-4X10GF, ICX7400-1X40GQ
Part | Description | Data link | Stacking links |
FAST ETHERNET OPTICS | |||
E1MG-100FX-OM | 100BASE-FX SFP optic MMF, LC connector, optical monitoring capable | √ | x |
E1MG-100FX-A | 100BASE-FX SFP optic MMF, LC connector, optical monitoring capable, TAA compliant | √ | x |
E1MG-100FX-IR-OM | 100BASE-FX IR SFP optic for SMF with LC connector, optical monitoring capable. For distances up to 15Km | √ | x |
E1MG-100FX-LR-OM | 100BASE-FX LR SFP optic for SMF with LC connector, optical monitoring capable. For distances up to 40Km | √ | x |
1 GbE Fiber Optics | |||
E1MG-SX-OM | 1000BASE-SX SFP optic, MMF, LC connector, optical monitoring capable | √ | x |
E1MG-SX-OM-T | 1000BASE-SX SFP optic, MMF, LC connector, optical monitoring capable, industrial temperature (-40°C to 85°C) | √ | x |
E1MG-SX-A | 1000BASE-SX SFP Optic, MMF, (LC), TAA compliant | √ | x |
E1MG-LX-OM | 1000BASE-LX SFP optic, SMF, LC connector, optical monitoring capable | √ | x |
E1MG-LX-OM-T | 1000BASE-LX SFP optic, SMF, LC connector, optical monitoring capable, industrial temperature (-40°C to 85°C) | √ | x |
E1MG-LX-A | 1000BASE-LX SFP Optic, SMF, LC connector, TAA compliant | √ | x |
E1MG-LHA-OM-T | 1000BASE-LHA SFP optic, SMF, LC connector, optical monitoring capable, industrial temperature (-40°C to 85°C) | √ | x |
E1MG-BXD | 1000BASE-BXD SFP optic SMF, transmits at 1490nm and receives at 1310nm, LC connector, single strand SMF fiber. This optic should only be connected to an E1MG-BXU at the far end. | √ | x |
E1MG-BXU | 1000BASE-BXU SFP optic SMF, transmits at 1310nm and receives at 1490nm, LC connector, single strand SMF fiber. This optic should only be connected to an E1MG-BXD at the far end. | √ | x |
E1MG-TX | 1000BASE-TX SFP Copper, RJ-45 connector | √ | x |
E1MG-TX-A | 1000BASE-TX SFP Copper, RJ-45, TAA compliant | √ | x |
1G-SFP-TWX-0101 | 1GbE Direct Attach SFP to SFP active copper cable, 1m | √ | x |
1G-SFP-TWX-0501 | 1GbE Direct Attach SFP to SFP active copper cable, 5m | √ | x |
10 GbE Fiber Optics | |||
10G-SFPP-USR | 10GBASE-USR, SFP+ optic (LC), target range 100m over MMF | √ | √ |
10G-SFPP-USR-SA | 10GBASE-USR, SFP+ Optic (LC), Range 100m MMF, standard temperature (0°C to 70°C), TAA compliant | √ | √ |
10G-SFPP-SR | 10GBASE-SR, SFP+ optic (LC), target range 300m over MMF | √ | √ |
10G-SFPP-SR-SA | 10GBASE-SR, SFP+ optic (LC), target range 300m over MMF, standard temperature (0°C to 70°C), TAA compliant | √ | √ |
10G-SFPP-SR-S | 10GBASE-SR, SFPP MMF LC connector, standard temperature (0°C to 70°C) | √ | √ |
10G-SFPP-LR | 10GBASE-LR, SFP+ optic (LC), for up to 10Km over SMF | √ | √ |
10G-SFPP-LR-SA | 10GBASE-LR, SFP+ optic (LC), for up to 10Km over SMF, standard temperature (0°C to 70°C), TAA compliant | √ | √ |
10G-SFPP-LR-S | 10GBASE-LR, SFPP SMF (LC), for up to 10Km over SMF, standard temperature (0°C to 70°C) | √ | √ |
10G-SFPP-ER | 10GBASE-ER SFP+ optic (LC), for up to 40Km over SMF | √ | x |
10G-SFPP-ZR | 10GBASE-ZR SFP+ optic (LC), for up to 80Km over SMF | √ | x |
10G-SFPP-LRM | 10GBASE-LRM SFP+ optic (LC), for up to 220m over MMF | √ | x |
10G-SFPP-BXD-S | 10GBASE-LR SFP+ Optic (LC) bidirectional downstream, standard temperature (0°C to 70°C) | √ | √ |
10G-SFPP-BXU-S | 10GBASE-LR SFP+ Optic (LC) bidirectional upstream, standard temperature (0°C to 70°C) | √ | √ |
10G-SFPP-TWX-0101 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 1m | √ | √ |
10G-SFPP-TWX-0108 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 1m, 8-pack | √ | √ |
10G-SFPP-TWX-0301 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 3m | √ | √ |
10G-SFPP-TWX-0308 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 3m, 8-pack | √ | √ |
10G-SFPP-TWX-0501 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 5m | √ | √ |
10G-SFPP-TWX-0508 | 10GbE Direct Attach SFP+ to SFP+ Active copper cable, 5m, 8-pack | √ | √ |
10G-SFPP-TWX-P-0101 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 1m | √ | √ |
10G-SFPP-TWX-P-0108 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 1m, 8-pack | √ | √ |
10G-SFPP-TWX-P-0301 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 3m | √ | √ |
10G-SFPP-TWX-P-0308 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 3m, 8-pack | √ | √ |
10G-SFPP-TWX-P-0501 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 5m | √ | √ |
10G-SFPP-TWX-P-0508 | 10GbE Direct Attach SFP+ to SFP+ Passive copper cable, 5m, 8-pack | √ | √ |
10GE-SFPP-AOC-0701 | 10GbE Direct Attach SFP+ to SFP+ Active Optical Cable, 7m | √ | √ |
10GE-SFPP-AOC-1001 | 10GbE Direct Attach SFP+ to SFP+ Active Optical Cable, 10m | √ | √ |
40 GbE Fiber Optics | |||
E40G-QSFP-SR4 | 40GBASE-SR4 QSFP+ optic (MTP 1×8 or 1×12), 100m over MMF OM3. 150m over MMF OM4 | √ | √ |
E40G-QSFP-ESR4 | 40GBASE-ESR4 QSFP+ optic (MTP 1x8 or 1x12), 300m over MMF | √ | x |
E40G-QSFP-LR4 | 40GBASE-LR4 QSFP+ optic (LC), for up to 10Km over SMF | √ | √ |
E40G-QSFP-LM4 | 40GBASE-LM4 QSFP+, 1310nm, 160m over duplex LC OM4 MMF | √ | x |
E40G-QSFP-ER4 | 40GBASE-ER4 QSFP+ optic (LC), for up to 40Km over SMF | √ | x |
E40G-QSFP-SR-BIDI | 40GbE SR QSFP+ optic (LC), bidirectional, 100m over OM3 MMF | √ | x |
E40G-QSFP-QSFP-C-0101 | 40GbE Direct Attach QSFP+ to QSFP+ Active Copper cable, 1m | √ | √ |
E40G-QSFP-QSFP-C-0301 | 40GbE Direct Attach QSFP+ to QSFP+ Active Copper cable, 3m | √ | √ |
E40G-QSFP-QSFP-C-0501 | 40GbE Direct Attach QSFP+ to QSFP+ Active Copper cable, 5m | √ | √ |
E40G-QSFP-C-0101 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 1m | √ | √ |
E40G-QSFP-C-0501 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 5m | √ | x |
40G-QSFP-C-00501 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 0.5m | √ | √ |
40G-QSFP-C-00508 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 0.5m, 8-pack | √ | √ |
E40G-QSFP-QSFP-P-0101 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 1m | √ | √ |
E40G-QSFP-QSFP-P-0301 | 40GbE Direct Attach QSFP+ to QSFP+ Passive Copper Cable, 3m | √ | √ |
E40G-QSFP-QSFP-AOC-1001 | 40GbE Direct Attach QSFP+ to QSFP+ Active Optical Cable, 10m | √ | x |
ICX7450-PREM-LIC | Ruckus ICX 7450 Layer 3 Premium Software License. |
ICX-MACSEC-LIC | License to enable MACsec encryption. |
ICX7400-4X1GF | Ruckus ICX 7450 4-port 100 Mbps/1 GbE SFP module |
ICX7400-4X10GF | Ruckus ICX 7450 4-port 1/10 GbE SFP/SFP+ module (for stacking or uplinks) |
ICX7400-4X10GC | Ruckus ICX 7450 4-port 1/10 GbE 10GBASE-T copper module |
ICX7400-1X40GQ | Ruckus ICX 7450 1-port 40 GbE QSFP+ module (for stacking or uplink) |
ICX7400-SERVICE-MOD | Ruckus ICX 7450 Service Module for IPsec VPN encryption |
RPS16-E | Ruckus ICX 7450/6610 PoE 1,000 W AC power supply with front-to-back airflow |
RPS16-I | Ruckus ICX 7450/6610 PoE 1,000 W AC power supply with back-to-front airflow. |
RPS16DC-E | Ruckus ICX 7450/6610 PoE 510 W DC power supply with front-to-back airflow. |
RPS16DC-I | Ruckus ICX 7450/6610 PoE 510 W DC power supply with back-to-front airflow. |
ICX-FAN10-E | Ruckus ICX 7450 front-to-back airflow fan |
ICX-FAN10-I | Ruckus ICX 7450 back-to-front airflow fan |
ICX7000-RMK | FRU, rack mount kit, two post, Ruckus ICX 7750/7450. |
XBR-R000295 | FRU, rack mount kit, four post, 24 in. to 32 in. depth rack |
Bạn đang cần tư vấn về sản phẩm: ICX7450-48P ?
Chào anh/chị, báo giá module 10G dùng được cho switch Ruckus ICX7450-48P đã được gửi vào mail của anh/chị.
Chào anh/chị, switch Ruckus ICX7450-48P có chia được VLAN.
Chào anh/chị, báo giá nguồn DC dùng được cho switch Ruckus ICX7450-48P đã được gửi vào mail của anh/chị.
Chào anh/chị, báo giá switch Ruckus ICX7450-48P đã được gửi vào mail của anh/chị.