| Datasheet C9200-48T-A | 
		
			| Description | Specifications | 
		
			| Performance | 
		
			| Switching capacity | 176 Gbps | 
		
			| Forwarding rate | 130.95 Mpps | 
		
			| Virtual Networks | 4 | 
		
			| Stacking bandwidth | 160 Gbps | 
		
			| Total number of MAC addresses | 32,000 | 
		
			| Total number of IPv4 routes (ARP plus learned routes) | 14,000 (10,000 direct routes and 4,000 indirect routes) | 
		
			| IPv4 routing entries | 4,000 | 
		
			| IPv6 routing entries | 2,000 | 
		
			| Multicast routing scale | 1,000 | 
		
			| QoS scale entries | 1,000 | 
		
			| ACL scale entries | 1,600 | 
		
			| Packet buffer per SKU | 6 MB buffers | 
		
			| Flexible NetFlow (FNF) entries | 16,000 flows | 
		
			| DRAM | 4 GB | 
		
			| Flash | 4 GB | 
		
			| VLAN IDs | 4096 | 
		
			| Total Switched Virtual Interfaces (SVIs) | 1000 | 
		
			| Jumbo frames | 9198 bytes | 
		
			| Wireless bandwidth per switch | Up to 48 Gbps | 
		
			| Default primary power supply | PWR-C5-1KWAC | 
		
			| Optional secondary power supply | PWR-C5-1KWAC | 
		
			| Features | 
		
			| Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder | 
		
			| Advanced switch capabilities and scale | EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF | 
		
			| Network segmentation | VRF, VXLAN, LISP, SGT | 
		
			| Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP | 
		
			| Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN | 
		
			| Security | MACsec-128 | 
		
			| Physical Specifications | 
		
			| Chassis Dimensions | 1.73 x 17.5 x 13.8 Inches 4.4 x 44.5 x 35.0 Centimeters
 | 
		
			| weight | 11.02 Pounds 5.0 Kilograms
 | 
		
			| Mean time between failures (hours) | 375,570 | 
		
			| Connectors | 
		
			| Connectors and cabling | - 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling - 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling - 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber) - 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber) - SFP+ connector - Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling - Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling - Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor | 
		
			| Power connectors | Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet. | 
		
			| Standards, Safety and compliance information | 
		
			| Standards | EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad   IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification IEEE 802.3bz 10G BASE-T specification RMON I and II standards SNMPv1, v2c, and v3 | 
		
			| Safety certifications | - IEC 60950-1 - UL 60950-1 - CAN/CSA C22.2 No. 60950-1 - EN 60950-1 - AS/NZS 60950.1 - Class I Equipment | 
		
			| Electromagnetic emissions certifications | - 47 CFR Part 15 - CISPR 22 Class A - CISPR 32 Class A - CNS 13438 - EN 300 386 - EN 55022 Class A - EN 55032 Class A - EN61000-3-2 - EN61000-3-3 - ICES-003 Class A - KN 32 - TCVN 7189 Class A - V-3 Class A - CISPR 24 - EN 300 386 - EN 55024 - KN 35 - TCVN 7317 | 
		
			| Environmental | Reduction of Hazardous Substances (ROHS) 5 | 
	
 
Bạn đang cần tư vấn về sản phẩm: C9200-48T-A ?
Chào anh,
Nhân viên tư vấn CNTTShop sẽ liên hệ tới anh để tư vấn, anh vui lòng để ý điện thoại ạ.
Bên em đã gửi báo giá Switch Cisco C9200-48T-A vào mail, anh vui lòng check mail để biết được thông tin!
Thiết bị chuyển mạch Cisco C9200-48T-A có thể sử dụng đồng thời module single mode và multi mode anh nhé.
Nguồn cho Thiết bị mạng Switch Cisco C9200-48T-A Tùy nhu cầu anh có thể sử dụng các mã nguồn sau: PWR-C5-125WAC , PWR-C5-600WAC , PWR-C5-1KWAC , PWR-C6-125WAC , PWR-C6-600WAC , PWR-C6-1KWAC , báo giá đã được gửi vào mail nhé anh
Thiết bị chuyển mạch Switch Cisco C9200-48T-A Catalyst 9200 48 Port 10/100/1000 Data, Network Advantage bảo hành 12 tháng bạn nhé.