Configure Basic Functions of Loopback Group Interface
Configuration Conditions
None
Configure Basic Functions of Loopback Group Interface
Table 13-2 Enter the aggregation group configuration mode
Step
|
Command
|
Description
|
Enter the global configuration mode
|
configure terminal
|
Mandatory
|
Create a loopback group
|
serviceloop-group serviceloop-group-id [ description description-name ]
|
Mandatory
|
Enter the L2/L3 Ethernet interface configuration mode
|
interface interface-name
|
Either
After entering the L2/L3 Ethernet interface configuration mode, the subsequent configuration will only take effect at the current interface; after entering the aggregation group configuration mode, the subsequent configuration will take effect at all member ports of the aggregation
|
Enter the aggregation group configuration mode
|
interface link-aggregation link-aggregation-id
|
Configure the loopback port
|
serviceloop-group serviceloop-group-id active
|
Mandatory
|
![note](/storage/images/Document/Maipu/note-icon.jpg)
-
The corresponding aggregation group must be created before entering the specified aggregation group configuration mode.
- Only support configuring L2 Ethernet interface, L3 Ethernet interface, L2 static convergence group and L3 static convergence group as loopback.