Maipu Administration Guide

Configure the Orphan Port

Configuration Condition

Before configuring the Orphan port, first complete the following task:

Create one MLAG domain

Configure Orphan Port of SLAVE Node as Shutdown when Peer-Link fails, but Keepalive Is Normal

By default, when peer link fails, but keepalive is normal, all MLAG ports of the slave node will be set to shutdown state, but orphan ports will not be set to shutdown state. If you want to set some orphan ports to shutdown state, you need to configure this command for these orphan ports

Table 13-17 Configure the orphan port of the slave node to shutdown when Peer-link fails, but Keepalive is normal

Step	Command	Description
Enter the global configuration mode.	configure terminal	-
L2 Ethernet interface configuration mode	interface interface-name	Either After entering the L2 Ethernet interface configuration mode, the subsequent configuration takes effect only on the current port. After entering the the L2 aggregation interface configuration mode, the subsequent configuration takes effect only on the aggregation group.
Enter the L2 aggregation interface configuration mode	interface link-aggregation link-aggregation-id
Configure the orphan port of the slave node to shutdown when Peer-link fails, but Keepalive is normal	mlag unpaired orphan-port suspend	Optional By default, do not configure the command.

Configure the Orphan Port

Configuration Condition

Configure Orphan Port of SLAVE Node as Shutdown when Peer-Link fails, but Keepalive Is Normal

Danh mục sản phẩm