Configure TLV LLDP Permits to Release

The neighbor device can get to know the details of the local device by releasing TLV.

Configuration Condition

None

The user can release different basic TLVs according to the actual application demand.

Table 7-10 Configure the basic TLV LLDP permits to release

Step	Command	Description
Enter the global configuration mode	configure terminal	-
Enter the L2 Ethernet interface configuration mode	interface interface-name	Either After entering the L2 Ethernet interface configuration mode, the subsequent configuration takes effect only on the current port. After entering the aggregation group configuration mode, the subsequent configuration takes effect only on the aggregation group.
Enter the aggregation group configuration mode	interface link-aggregation link-aggregation-id
Configure the basic TLV LLDP permits to release	lldp tlv-select { basic-tlv { all \| port-description \| system-capability \| system-description \| system-name } \| dot1-tlv { all \| port-vlan-id \| protocol-vlan-id \| vlan- name } \| dot3-tlv { all \| link-aggregation \| mac-physic \| max-frame-size \| power } }	Optional By default, permit to release all basic TLVs.

The user can release different organization-defined TLVs according to the actual application demand.

Table 7-11 Configure the organization-defined TLV LLDP permits to release

Step	Command	Description
Enter the global configuration mode	configure terminal	-
Enter the L2 Ethernet interface configuration mode	interface interface-name	Either After entering the L2 Ethernet interface configuration mode, the subsequent configurationtakes effect only on the current port. After entering the aggregation group configuration mode, the subsequent configuration takes effect only on the aggregation group.
Enter the aggregation group configuration mode	interface link-aggregation link-aggregation-id
Configure the organization-defined TLV LLDP permits to release	lldp tlv-select {dot1-tlv { all \| port-vlan-id \| protocol- vlan-id \| vlan-name } \| dot3- tlv { all \| link-aggregation \| mac-physic \| max-frame- size \| power } }	Optional By default, permit to release all organization- defined TLVs.

The user can release different MED TLVs according to the actual application demand.

Table 7-12 Configure the MED TLV LLDP permits to release

Step	Command	Description
Enter the global configuration mode	configure terminal	-
Enter the L2 Ethernet interface configuration mode	interface interface-name	Either After entering the L2 Ethernet interface configuration mode, the subsequent configuration takes effect only on the current port. After entering the aggregation group configuration mode, the subsequent configuration takes effect only on the aggregation group.
Enter the aggregation group configuration mode	interface link-aggregation link- aggregation-id
Configure the MED TLV LLDP permits to release	lldp med-tlv-select { all \| capability \| location-id elin-address phonenum \| network-policy \| power- via-mdi \| inventory }	Optional By default, do not permit to release all MED TLVs.