Configure to Restart a Device
Configuration Condition
None
Restart a Device
When a device fault occurs, you can choose to restart the device according to the actual situation so as to eliminate the fault. The device restart modes include cold restart and hot restart. In a cold restart, the user can directly power off the device and power on the device again. In a hot restart, the user restarts the device by using a restart command. During the hot restart process, the device is not powered off.
Table 7-6 Restarting a Device
Step
|
Command
|
Description
|
Use a command to restart the device or in the VST mode, use the command to restart all in-place virtual switch devices in the VST domain
|
reload
|
Mandatory
|
![note](/storage/images/Document/Maipu/note-icon.jpg)
-
If you forcedly power off and restart a device that is in the operating status, hardware damage or data loss may be caused. Therefore, this restart mode is usually not recommended.
- If you use the reload command to restart the device, all the services of the device are interrupted. Exercise caution when performing this operation.