Set the Bootloader Boot Parameters
Configuration Condition
None
Set bootloader Boot Parameters
Table 11‑3 Set the Bootloader boot parameters
Step
|
Command
|
Description
|
Enter the Bootloader configuration mode
|
None
|
Mandatory.
After the device is powered on, press the Ctrl + C keys to enter the Bootloader configuration mode. After you enter the mode, the " RTL93xx#" is prompted.
|
Set the boot parameters of IOS in bootloader
|
change index[0~3] ge0 filename local-ip-addr host-ip-addr [gatewayip] [ netmask]
change index[0~3] flash0 filename
|
Mandatory
The command of the first line is the network boot configuration parameter. If it is upgrading across the segment, it is necessary to add the gateway and mask.
The command of the second line is the boot configuration parameter of the flash storage device.
|
![note](/storage/images/Document/Maipu/note-icon.jpg)
-
Currently, the bootloader program of the switch can set the boot parameter to start the image program via the network.