Configure Static Bound Entries of Port IPv6 Source Guard

Configuration Condition

Before configuring the static bound entries of the port IPv6 Source Guard, first complete the following task:

The static bound entries of the port IPv6 Source Guard are the basis of filtering the IPv6 packets received by the specified port.

Table 5-5 Configure the static bound entries of the port IPv6 Source Guard

Step	Command	Description
Enter global configuration mode	config terminal	-
Enter the L2 Ethernet interface configuration mode	interface interface-name	Either After entering the L2 Ethernet interface configuration mode, the subsequent configuration just takes effect on the current port. After entering the aggregation group configuration mode, the subsequent configuration just takes effect on the aggregation group.
Enter the aggregation group configuration mode	interface link-aggregation link-aggregation-id
Configure the static bound entries of the port IPv6 Source Guard	ipv6 source binding { ipv6-address ipv6-address [ mac-address mac-address [ vlan vlan-id ] \| vlan vlan-id ] \| mac-address mac-address [ vlan vlan-id ] }	Mandatory By default, there is no static bound entry of the port IPv6 Source Guard.