Enable the ARP Proxy Function
Configuration Condition
Before enabling the ARP proxy function, ensure that:
- The VLAN interface corresponding to the super-VLAN and the IP address have been configured.
Configure the ARP Proxy Function
After the ARP proxy function of a super-VLAN is configured, the sub-VLANs can communicate with each other at layer 3 through ARP proxy.
Table 5-4 Enabling the ARP Proxy Function
Step
|
Command
|
Description
|
Enter the global configuration mode.
|
configure terminal
|
-
|
Enter the super-VLAN configuration mode.
|
super-vlan vlan-id
|
-
|
Enable the ARP proxy function.
|
arp proxy enable
|
Mandatory.
By default, the ARP proxy function is disabled.
|
-
The ARP proxy function relies on the layer-3 forwarding function. If the device does not support the layer-3 forwarding function, the ARP proxy function does not take effect.