Configure RMON Extended Alarm Group
RMON extended alarm group can calculate the alarm variable, and then, compare the calculation result with the set threshold value, realizing the richer alarm function.
Configuration Condition
Before configuring the RMON alarm group, first complete the following task:
- Enable the SNMP proxy function
- Enable the TRAP function of RMON in SNMP
- Configure one statistics group
Configure RMON Extended Alarm Group
Table 9-4 Configure the RMON extended alarm group
|
Step
|
Command
|
Description
|
|
Enter the global configuration mode
|
configure terminal
|
-
|
|
Enable the RMON function
|
rmon
|
Optional
|
|
Configure one statistics group
|
rmon statistics ethernet statistics-num OID [ owner owner ]
|
Mandatory
By default, the owner of the statistics group is config.
|
|
Configure RMON alarm group
|
rmon prialarm alarm-num WORD interval { absolute | delta } risingthreshold rising-threshold rising-event fallingthreshold falling-threshold falling-event entrytype forever [ owner owner ]
|
Mandatory
By default, the owner of the alarm group is config.
|
Switch
.png){kind=icon}
.png){kind=logo}
