KD: 0369 832 657 - 0862 323 559 Purchase: 0906 051 599

Danh mục sản phẩm

Configure PIM-SM Basic Functions

Configuration Condition

Before configuring PIM-SM, first complete the following task:

Configure the network layer address of the interface, making the neighboring node network layer reachable
Configure any unicast route protocol, making the intra-domain route reachable

Enable PIM-SM Protocol

Table 7–2 Enable the PIM-SM protocol

Step	Command	Description
Enter global configuration mode	configure terminal	-
Enable the IP multicast forwarding	ip multicast-routing	Mandatory By default, the IP multicast forwarding is not enabled.
Enter interface configuration mode	interface interface-name	-
Enable the PIM-SM protocol	ip pim sparse-mode	Either By default, PIM-SM is disabled on the interface.
Enable the PIM-SM protocol	ip pim sparse-mode passive	Either By default, PIM-SM is disabled on the interface.

After enabling the PIM-SM protocol, automatically enable the IGMP protocol.
After enabling the PIM-SM function, all PIM-SM configurations can take effect.

Công Ty TNHH Công Nghệ Việt Thái Dương

DMCA.com Protection Status

Văn phòng Hà Nội:

NTT03, Line1, Thống Nhất Complex,
Thanh Xuân, Hà Nội.

Điện thoại: 0962.052.874

Email: kd2@cnttshop.vn

Văn phòng TPHCM:

Số 31B, Đường 1, Phường An Phú,
Quận 2 (Thủ Đức), TP HCM.

Điện thoại: 0967.415.023

Email: kd5@cnttshop.vn