Maipu Administration Guide

Configure SNMP Basic Functions

Configuration Condition

None

Enable SNMP Service

If the device is enabled with the SNMP service, the device can manage and configure via the SNMP network management software.

Table 8–3 Enable the SNMP service

Step

Command

Description

Enter the global configuration mode

config terminal

Enable the SNMP service

snmp-server start [ rfc ]

Mandatory

By default, the SNMP service is disabled.

Configure MIB View

Use the view-based access control model to judge whether the associated management object of one operation is permitted by the view. Only the management objects permitted by the view can be permitted to access.

Table 8–4 Configure the MIB view

Step	Command	Description
Enter the global configuration mode	config terminal	-
Configure the MIB view	snmp-server view view-name oid-string { include \| exclude }	Mandatory By default, the SNMP view name is Default.
Configure the system startup time type got in MIB	snmp-server mib2 sysuptime { snmp-agent-uptime \| system-uptime }	Mandatory By default, it is system- uptime.

Configure Manager Contact Information

The manager contact information is one information node in the SNMP protocol. The network management software can get the information via SNMP.

Table 8–5 Configure the manager contact mode

Step	Command	Description
Enter the global configuration mode	config terminal	-
Configure the manager contact information	snmp-server contact contact-line	Mandatory

Configure Device Physical Location Information

The device physical location information is one information node in the SNMP protocol. The network management software can get the information via SNMP.

Table 8–6 Configure the physical location information of the device

Step	Command	Description
Enter the global configuration mode	config terminal	-
Configure the physical location information of the device	snmp-server location location	Mandatory