Configure QinQ Drop Function
After the port is configured with the QinQ drop function, if the port receives a packet that does not match the port-based flexible QinQ entry, 1:1 VLAN mapping entry and N:1 VLAN mapping entry, the packet will be discarded.
Configuration Condition
To configure the QinQ Drop function, first complete the following task:
- Configure the basic QinQ function and the port-based flexible QinQ function or 1:1 VLAN mapping function.
Enable QinQ Drop Function
Table 4-8 Enable QinQ Drop function
|
Step
|
Command
|
Description
|
|
Enter the global configuration mode.
|
configure terminal
|
-
|
|
Enter the L2 Ethernet interface configuration mode.
|
interface interface-name
|
Either
After you enter the L2 Ethernet interface configuration mode, the subsequent configuration takes effect only on the current port. After you enter the aggregation group configuration mode, the subsequent configuration takes effect only within the aggregation group.
|
|
Enter the aggregation group configuration mode.
|
link-aggregation link-aggregation-id
|
| Enable QinQ Drop function |
vlan dot1q-tunnel drop |
Mandatory
By default, the QinQ Drop function is not enabled.
|
-
On one port, the QinQ Drop function cannot coexist with QinQ Evc.
Switch
.png){kind=icon}
.png){kind=logo}
